Use Sunton 2432S028R official touch map and fix lower-left offset.

Match board JSON X/Y cmds and MIRROR_X; shift UI +45,-45 from red-vs-finger logs.

Co-authored-by: Cursor <cursoragent@cursor.com>
This commit is contained in:
2026-10-17 18:25:34 +08:00
parent 01c52661e4
commit 8a29196a39
5 changed files with 71 additions and 44 deletions

View File

@@ -1,10 +1,14 @@
# Changelog # Changelog
## 2026-10-17 — Sunton official touch + log offset
- Use esp32-2432S028R.json touch flags: X=0xD1 Y=0x91, linear/4096, MIRROR_X.
- Keep landscape 240x320+ROTATION_270.
- Serial/user: red cursor lower-left of finger → UI corr (+45,-45), inverse-feed LVGL.
## 2026-10-17 — Restore landscape + RNT touch map ## 2026-10-17 — Restore landscape + RNT touch map
- Revert create(320x240) — caused 花屏; keep 240x320 + ROTATION_270 landscape. - Revert create(320x240) 花屏; RNT map superseded by Sunton official above.
- Touch = Random Nerd Tutorials recipe: SoftSPI rot2, map to 240x320, feed LVGL
directly (no extra inverse). Red cursor shows estimated UI point.
## 2026-10-17 — Touch = draw coords (CYD LVGL9 official) [reverted] ## 2026-10-17 — Touch = draw coords (CYD LVGL9 official) [reverted]

View File

@@ -1,5 +1,5 @@
name: CYD TF card + touch speaker (cyd) name: CYD TF card + touch speaker (cyd)
git: 1381c22 git: 01c5266
date: 2026-10-17 date: 2026-10-17
board: ESP32-2432S028R (ILI9341) board: ESP32-2432S028R (ILI9341)
features: TF/SD info, SoftSPI touch, GPIO26 speaker features: TF/SD info, SoftSPI touch, GPIO26 speaker
@@ -12,5 +12,5 @@ offsets:
sha256: sha256:
bootloader.bin 3D234A7471F67B013686DABD4DEE7C1FA915C9928463616A94BC9297ACF1ABF8 bootloader.bin 3D234A7471F67B013686DABD4DEE7C1FA915C9928463616A94BC9297ACF1ABF8
boot_app0.bin F94C5D786A7A8FAB06AC5D10E33BF37711A6697636DC037559EA19CC410A17F0 boot_app0.bin F94C5D786A7A8FAB06AC5D10E33BF37711A6697636DC037559EA19CC410A17F0
firmware.bin 7C632F8D033997F18F39056F321011B2DB7D0B0FA64F14FED269EB70EE86C814 firmware.bin 94A0C3011B584646E8D4F4D29531252E97B488BBE47827DEDD2CDB21FD1FA76F
partitions.bin 148B959CBFF1C38AA8E1D5C0BA9D612C54997B945E56A63F41223EEF650653A1 partitions.bin 148B959CBFF1C38AA8E1D5C0BA9D612C54997B945E56A63F41223EEF650653A1

Binary file not shown.

View File

@@ -45,8 +45,8 @@ void setup() {
lv_init(); lv_init();
// RNT / temperature:240x320 + ROTATION_270 → 横屏(勿改成 create 320x240,会花屏) // Sunton 官方:240x320 + ROTATION_270 → 横屏(勿 create 320x240,会花屏)
// https://randomnerdtutorials.com/lvgl-cheap-yellow-display-esp32-2432s028r/ // 触摸见 touch.cpp(官方 mirror_x + 日志补偿)
lv_display_t *disp = lv_display_t *disp =
lv_tft_espi_create(SCREEN_WIDTH, SCREEN_HEIGHT, draw_buf, sizeof(draw_buf)); lv_tft_espi_create(SCREEN_WIDTH, SCREEN_HEIGHT, draw_buf, sizeof(draw_buf));
lv_display_set_rotation(disp, LV_DISPLAY_ROTATION_270); lv_display_set_rotation(disp, LV_DISPLAY_ROTATION_270);

View File

@@ -4,17 +4,21 @@
#include <Arduino.h> #include <Arduino.h>
/** /**
* SoftSPI XPT2046(SD 占 VSPI,触摸必须 SoftSPI) * SoftSPI XPT2046 — 对齐 Sunton 官方板级(esp32-2432S028R.json / smartdisplay):
* TOUCH_SWAP_XY=false, TOUCH_MIRROR_X=true, TOUCH_MIRROR_Y=false
* x_max=240, y_max=320
* X 通道 CMD=0xD1, Y 通道 CMD=0x91(与 PaulStoffregen 命名相反)
* 线性:coord = adc * max / 4096,再 mirror_x
* 显示仍用 create(240,320)+LV_DISPLAY_ROTATION_270(横屏,勿改 320x240)
* *
* 现成方案 — Random Nerd Tutorials CYD + LVGL: * 用户日志:红点在手指左下方 → UI 需向右上修正(见 TOUCH_UI_DX/DY)
* create(240,320) + LV_DISPLAY_ROTATION_270 * https://github.com/rzeldent/platformio-espressif32-sunton/blob/main/esp32-2432S028R.json
* touchscreen.setRotation(2)
* x = map(p.x, 200, 3700, 1, 240)
* y = map(p.y, 240, 3800, 1, 320)
* 直接喂给 LVGL(由 LVGL 做旋转,不要再反变换 / 不要建 320x240)
* https://randomnerdtutorials.com/lvgl-cheap-yellow-display-esp32-2432s028r/
*/ */
// 红点相对手指的补偿(像素,横屏 UI):左偏→+X,下偏→-Y
static constexpr int16_t TOUCH_UI_DX = 45;
static constexpr int16_t TOUCH_UI_DY = -45;
int16_t g_dbg_phys_x = -1; int16_t g_dbg_phys_x = -1;
int16_t g_dbg_phys_y = -1; int16_t g_dbg_phys_y = -1;
int16_t g_dbg_logic_x = -1; int16_t g_dbg_logic_x = -1;
@@ -63,14 +67,17 @@ void touch_init() {
pinMode(CYD_TOUCH_IRQ, INPUT); pinMode(CYD_TOUCH_IRQ, INPUT);
digitalWrite(CYD_TOUCH_CS, HIGH); digitalWrite(CYD_TOUCH_CS, HIGH);
digitalWrite(CYD_TOUCH_CLK, LOW); digitalWrite(CYD_TOUCH_CLK, LOW);
Serial.println("Touch: RNT SoftSPI rot2 map 240x320"); Serial.printf("Touch: Sunton official mirror_x + UI corr(%d,%d)\n",
(int)TOUCH_UI_DX, (int)TOUCH_UI_DY);
} }
void touch_read_cb(lv_indev_t * /*indev*/, lv_indev_data_t *data) { void touch_read_cb(lv_indev_t * /*indev*/, lv_indev_data_t *data) {
uint16_t adc_x = xpt_read(0x90); // 官方驱动:X=0xD1, Y=0x91(先丢弃一次噪声读)
uint16_t adc_y = xpt_read(0xD0); (void)xpt_read(0xD1);
adc_x = (uint16_t)((adc_x + xpt_read(0x90)) / 2); uint16_t adc_x = xpt_read(0xD1);
adc_y = (uint16_t)((adc_y + xpt_read(0xD0)) / 2); uint16_t adc_y = xpt_read(0x91);
adc_x = (uint16_t)((adc_x + xpt_read(0xD1)) / 2);
adc_y = (uint16_t)((adc_y + xpt_read(0x91)) / 2);
const bool irq = (digitalRead(CYD_TOUCH_IRQ) == LOW); const bool irq = (digitalRead(CYD_TOUCH_IRQ) == LOW);
const bool in_range = const bool in_range =
@@ -82,45 +89,61 @@ void touch_read_cb(lv_indev_t * /*indev*/, lv_indev_data_t *data) {
return; return;
} }
// XPT2046_Touchscreen setRotation(2) // esp_touch_xpt2046: (adc>>3 等价 12bit) * max / 4096
const int16_t p_x = (int16_t)adc_x; int16_t px = (int16_t)(((uint32_t)adc_x * SCREEN_WIDTH) / 4096);
const int16_t p_y = (int16_t)(4095 - adc_y); int16_t py = (int16_t)(((uint32_t)adc_y * SCREEN_HEIGHT) / 4096);
// RNT:映射到物理 240x320,交给 LVGL ROTATION_270 // TOUCH_MIRROR_X=true
int16_t x = map(p_x, 200, 3700, 1, SCREEN_WIDTH); px = (int16_t)((SCREEN_WIDTH - 1) - px);
int16_t y = map(p_y, 240, 3800, 1, SCREEN_HEIGHT);
if (x < 0) { if (px < 0) {
x = 0; px = 0;
} }
if (y < 0) { if (py < 0) {
y = 0; py = 0;
} }
if (x >= SCREEN_WIDTH) { if (px >= SCREEN_WIDTH) {
x = SCREEN_WIDTH - 1; px = SCREEN_WIDTH - 1;
} }
if (y >= SCREEN_HEIGHT) { if (py >= SCREEN_HEIGHT) {
y = SCREEN_HEIGHT - 1; py = SCREEN_HEIGHT - 1;
} }
// 预估 LVGL 270 后的 UI 坐标(光标用):(y, 239-x) // LVGL ROTATION_270 后 UI:(py, 239-px);再按日志把红点挪向手指
const int16_t ui_x = y; int16_t ui_x = (int16_t)(py + TOUCH_UI_DX);
const int16_t ui_y = (int16_t)((SCREEN_WIDTH - 1) - x); int16_t ui_y = (int16_t)(((SCREEN_WIDTH - 1) - px) + TOUCH_UI_DY);
g_dbg_phys_x = x; if (ui_x < 0) {
g_dbg_phys_y = y; ui_x = 0;
}
if (ui_y < 0) {
ui_y = 0;
}
if (ui_x >= UI_HOR_RES) {
ui_x = UI_HOR_RES - 1;
}
if (ui_y >= UI_VER_RES) {
ui_y = UI_VER_RES - 1;
}
// 反变换喂给 LVGL,使其变换后落到 (ui_x, ui_y)
const int16_t feed_x = (int16_t)((SCREEN_WIDTH - 1) - ui_y);
const int16_t feed_y = ui_x;
g_dbg_phys_x = px;
g_dbg_phys_y = py;
g_dbg_logic_x = ui_x; g_dbg_logic_x = ui_x;
g_dbg_logic_y = ui_y; g_dbg_logic_y = ui_y;
g_dbg_touch_down = true; g_dbg_touch_down = true;
static uint32_t last_log = 0; static uint32_t last_log = 0;
if (millis() - last_log > 120) { if (millis() - last_log > 100) {
last_log = millis(); last_log = millis();
Serial.printf("Touch p(%d,%d) feed(%d,%d) UI~(%d,%d)\n", p_x, p_y, x, y, Serial.printf("Touch adc(%u,%u) phys(%d,%d) UI(%d,%d) feed(%d,%d)\n", adc_x,
ui_x, ui_y); adc_y, px, py, ui_x, ui_y, feed_x, feed_y);
} }
data->point.x = x; data->point.x = feed_x;
data->point.y = y; data->point.y = feed_y;
data->state = LV_INDEV_STATE_PRESSED; data->state = LV_INDEV_STATE_PRESSED;
} }