's'

.gitignore

@@ -10,7 +10,7 @@ __pycache__/
 .Python
 build/
 develop-eggs/
-dist/
+# dist/
 downloads/
 eggs/
 .eggs/

audio

@@ -0,0 +1,30 @@
+gpt的
+"-af",
+"arnndn=m=./arnndn-models/cb.rnnn:mix=0.88,"    # 人声增强
+"afftdn=nf=-24:tn=1,"                                         # FFT 降噪，抹平音乐中频
+"highpass=f=110,lowpass=f=4800,"                               # 切掉低音鼓/高频镲
+"equalizer=f=250:width_type=o:width=2:g=-9,"                   # 衰减低中频，音乐基础弱化
+"equalizer=f=800:width_type=o:width=1.5:g=-6,"                 # 再衰减中频，人声外区域
+"atempo=1.03,"                                                 # 轻微加速 3%，节奏轻微错位
+"asetrate=48000*1.02,aresample=48000,"                         # 音高上移 ~1/2 半音
+"afreqshift=shift=20,"                                         # 整体频率偏移 20Hz，破坏指纹
+"acompressor=threshold=-28dB:ratio=5:attack=8:release=80:makeup=5," # 压缩动态，音乐更“扁”
+"volume=1.15,"                                                 # 补偿整体音量
+"aresample=async=1:first_pts=0"                                # 保证音视频同步
+
+
+
+grok的
+"-af", "arnndn=m=./arnndn-models/cb.rnnn:mix=0.88,"
+"afftdn=nf=-24:tn=1,"  # 强FFT降噪，进一步抹平音乐中频
+"highpass=f=110,lowpass=f=4800,"  # 切掉低音鼓/高频镲，音乐能量大减
+"equalizer=f=250:width_type=o:width=2:g=-9,"  # 衰减低中频（很多音乐基础）
+"equalizer=f=800:width_type=o:width=1.5:g=-6,"  # 再衰减中频人声外区域
+"atempo=1.06,"  # 轻微加速6%，节奏错位
+"asetrate=48000*1.04,aresample=48000,"  # 音高上移约3/4半音
+"aphaser=type=t:decay=0.5:speed=0.4:delay=2,"  # 相位扫，谱图模糊
+"flanger=delay=4:depth=3:regen=35:width=60:speed=0.35,"  # 轻法兰杰，增加金属/扫频感
+"afreqshift=shift=45,"  # 整体频率偏移45Hz，进一步乱指纹
+"acompressor=threshold=-28dB:ratio=5:attack=8:release=80:makeup=5,"  # 压缩动态，让音乐更“扁”
+"volume=1.15,"  # 补偿整体音量损失
+"aresample=async=1:first_pts=0"

backup/111

@@ -1,104 +0,0 @@
-  try:
-                                        if split_video_by_time:
-                                            now = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-                                            print(f"{rec_info} 开始推流到 YouTube: {anchor_name}_{title_in_name}_{now}")
-
-                                            YT_STREAM_KEY = "ue78-1c3e-mr9g-14mz-9r4z"
-                                            youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-                                            # ------------------------
-                                            # NVENC 检测
-                                            # ------------------------
-                                            codec_v = "libx264"
-                                            preset_v = "veryfast"
-                                            tune_param = ["-tune", "zerolatency"]
-
-                                            try:
-                                                if platform.system().lower() in ["windows", "linux"]:
-                                                    check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=10)
-                                                    if check.returncode == 0:
-                                                        enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], 
-                                                                            capture_output=True, text=True, timeout=10)
-                                                        if "h264_nvenc" in enc.stdout:
-                                                            codec_v = "h264_nvenc"
-                                                            preset_v = "llhq"
-                                                            tune_param = ["-tune", "ll", "-rc", "vbr"]
-                                                            print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-                                            except:
-                                                pass
-
-                                            # ------------------------
-                                            # FFmpeg 命令
-                                            # ------------------------
-                                            thread_count = min(6, os.cpu_count() or 4)
-                                            ffmpeg_command = [
-                                                "ffmpeg",
-                                                "-re",
-                                                "-i", real_url,
-                                                "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-                                                "-c:v", codec_v,
-                                                "-preset", preset_v,
-                                                *tune_param,
-                                                "-b:v", "2500k",
-                                                "-maxrate", "2500k",
-                                                "-bufsize", "5000k",
-                                                "-g", "50",
-                                                "-r", "25",
-                                                "-pix_fmt", "yuv420p",
-                                                "-bf", "0",
-                                                "-c:a", "aac",
-                                                "-b:a", "128k",
-                                                "-ar", "44100",
-                                                "-ac", "2",
-                                                "-af", "aresample=async=1:first_pts=0",
-                                                "-fflags", "+genpts+nobuffer",
-                                                "-flags", "+low_delay",
-                                                "-thread_queue_size", "512",
-                                                "-threads", str(thread_count),
-                                                "-f", "flv",
-                                                youtube_rtmp
-                                            ]
-
-                                            # ------------------------
-                                            # 永不断流逻辑
-                                            # ------------------------
-                                            proc = None
-                                            while True:
-                                                try:
-                                                    if proc and proc.poll() is None:
-                                                        proc.terminate()
-                                                        try:
-                                                            proc.wait(timeout=8)
-                                                        except:
-                                                            proc.kill()
-
-                                                    print(f"{anchor_name}_{title_in_name}_{now} → 启动 YouTube 推流...")
-                                                    proc = subprocess.Popen(
-                                                        ffmpeg_command,
-                                                        stdin=subprocess.DEVNULL,
-                                                        stdout=subprocess.DEVNULL,
-                                                        stderr=subprocess.PIPE,
-                                                        text=True
-                                                    )
-
-                                                    while True:
-                                                        line = proc.stderr.readline()
-                                                        if not line:
-                                                            break
-                                                        line = line.strip()
-                                                        if "error" in line.lower() or "warn" in line.lower():
-                                                            print(f"FFmpeg: {line}")
-                                                        if proc.poll() is not None:
-                                                            break
-
-                                                    code = proc.returncode
-                                                    if code != 0:
-                                                        print(f"FFmpeg 退出（code={code}），随机延迟后重连...")
-                                                    time.sleep(random.uniform(1, 3))
-
-                                                except Exception as e:
-                                                    print(f"启动 FFmpeg 异常: {e}")
-                                                    time.sleep(random.uniform(1, 3))
-
-                                    except Exception as e:
-                                        print(f"外层异常: {e}")

backup/333333

@@ -1,147 +0,0 @@
-# ====================== YouTube 转推流【终极无报错版】======================
-# 直接替换原来的整段 try: ... except: ... 代码即可
-# 零报错、零依赖、下播秒清、不卡56
-try:
-    if split_video_by_time:
-        now = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-        title_suffix = f"_{title_in_name}" if title_in_name else ""
-        stream_title = f"{anchor_name}{title_suffix}_{now}"
-
-        # 改这里就行，你的 YouTube 推流密钥
-        YT_STREAM_KEY = "qxvb-r47b-r5ju-6ud3-6k7z"
-        youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-        print(f"{rec_info} 开始推流到 YouTube: {stream_title}")
-
-        # ----------------- NVENC 检测（不变）-----------------
-        codec_v = "libx264"
-        preset_v = "veryfast"
-        tune_param = ["-tune", "zerolatency"]
-        try:
-            if platform.system().lower() in ["windows", "linux"]:
-                check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=8)
-                if check.returncode == 0:
-                    enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"],
-                                        capture_output=True, text=True, timeout=8)
-                    if "h264_nvenc" in enc.stdout:
-                        codec_v = "h264_nvenc"
-                        preset_v = "p5"
-                        tune_param = ["-tune", "ll", "-rc", "vbr"]
-                        print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-        except:
-            pass
-
-        # ----------------- FFmpeg 命令 -----------------
-        ffmpeg_command = [
-            "ffmpeg", "-re", "-i", real_url,
-            "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-            "-c:v", codec_v, "-preset", preset_v, *tune_param,
-            "-b:v", "2500k", "-maxrate", "2500k", "-bufsize", "5000k",
-            "-g", "50", "-r", "25", "-pix_fmt", "yuv420p", "-bf", "0",
-            "-c:a", "aac", "-b:a", "128k", "-ar", "44100", "-ac", "2",
-            "-af", "aresample=async=1:first_pts=0",
-            "-flags", "+low_delay", "-fflags", "+genpts",
-            "-thread_queue_size", "512", "-threads", "6",
-            "-f", "flv", youtube_rtmp
-        ]
-
-        # ----------------- 永不断流主循环 -----------------
-        proc = None
-        while True:
-            try:
-                # 杀掉旧进程
-                if proc and proc.poll() is None:
-                    proc.terminate()
-                    try:
-                        proc.wait(timeout=6)
-                    except:
-                        proc.kill()
-
-                print(f"启动 YouTube 推流 → {stream_title}")
-                proc = subprocess.Popen(
-                    ffmpeg_command,
-                    stdin=subprocess.DEVNULL,
-                    stdout=subprocess.PIPE,
-                    stderr=subprocess.PIPE,
-                    text=True,
-                    bufsize=1,
-                    universal_newlines=True
-                )
-
-                error_counter = 0
-                last_error_time = time.time()
-
-                while True:
-                    line = proc.stderr.readline()
-                    if not line and proc.poll() is not None:
-                        break
-                    if not line:
-                        continue
-
-                    line = line.strip()
-                    print(f"FFmpeg: {line}")
-
-                    if any(kw in line.lower() for kw in ["error", "failed", "invalid", "dropping"]):
-                        error_counter += 1
-                        last_error_time = time.time()
-                    else:
-                        error_counter = 0
-
-                    if error_counter >= 6 and (time.time() - last_error_time) < 1.3:
-                        print("检测到主播已下播，停止推流")
-                        break
-
-                    if time.time() - last_error_time > 2:
-                        error_counter = 0
-
-                returncode = proc.returncode if proc.poll() is not None else -1
-                if returncode != 0:
-                    print(f"FFmpeg 崩溃（code={returncode}），5秒后重连...")
-                    time.sleep(5)
-                    continue
-                else:
-                    print("主播已下播，YouTube 推流正常结束")
-                    break
-
-            except Exception as e:
-                print(f"推流异常: {e}，5秒后重试...")
-                time.sleep(5)
-
-        # ====================== 彻底清理（关键！）======================
-        if proc and proc.poll() is None:
-            proc.terminate()
-            try:
-                proc.wait(timeout=5)
-            except:
-                proc.kill()
-
-        # 精准移除本直播间状态（不影响其他直播）
-        recording.discard(record_name)
-        recording_time_list.pop(record_name, None)
-
-        # 更新 monitoring 计数（项目原逻辑就是这么写的，直接操作全局变量）
-        if record_url in running_list:
-            running_list.remove(record_url)
-            # 直接操作全局变量 monitoring（原项目就是这样写的）
-            monitoring = max(0, monitoring - 1)
-
-        # 调用项目自带的清理函数
-        try:
-            clear_record_info(record_name, record_url)
-        except:
-            pass
-
-        color_obj.print_colored(f"[{record_name}] YouTube 推流已彻底停止并清理完毕\n", color_obj.GREEN)
-
-except Exception as e:
-    # 外层任何异常也要强制清理
-    print(f"YouTube 推流外层异常: {e}")
-    try:
-        recording.discard(record_name)
-        recording_time_list.pop(record_name, None)
-        if record_url in running_list:
-            running_list.remove(record_url)
-            monitoring = max(0, monitoring - 1)
-        clear_record_info(record_name, record_url)
-    except:
-        pass

backup/44444

@@ -1,146 +0,0 @@
-                                    # ====================== YouTube 转推流【终极无报错版】======================
-                                    # 直接替换原来的整段 try: ... except: ... 代码即可
-                                    # 零报错、零依赖、下播秒清、不卡56
-                                    try:
-                                        now = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-                                        title_suffix = f"_{title_in_name}" if title_in_name else ""
-                                        stream_title = f"{anchor_name}{title_suffix}_{now}"
-
-                                        # 改这里就行，你的 YouTube 推流密钥
-                                        YT_STREAM_KEY = "qxvb-r47b-r5ju-6ud3-6k7z"
-                                        youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-                                        print(f"{rec_info} 开始推流到 YouTube: {stream_title}")
-
-                                        # ----------------- NVENC 检测（不变）-----------------
-                                        codec_v = "libx264"
-                                        preset_v = "veryfast"
-                                        tune_param = ["-tune", "zerolatency"]
-                                        try:
-                                            if platform.system().lower() in ["windows", "linux"]:
-                                                check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=8)
-                                                if check.returncode == 0:
-                                                    enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"],
-                                                                        capture_output=True, text=True, timeout=8)
-                                                    if "h264_nvenc" in enc.stdout:
-                                                        codec_v = "h264_nvenc"
-                                                        preset_v = "p5"
-                                                        tune_param = ["-tune", "ll", "-rc", "vbr"]
-                                                        print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-                                        except:
-                                            pass
-
-                                        # ----------------- FFmpeg 命令 -----------------
-                                        ffmpeg_command = [
-                                            "ffmpeg", "-re", "-i", real_url,
-                                            "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-                                            "-c:v", codec_v, "-preset", preset_v, *tune_param,
-                                            "-b:v", "2500k", "-maxrate", "2500k", "-bufsize", "5000k",
-                                            "-g", "50", "-r", "25", "-pix_fmt", "yuv420p", "-bf", "0",
-                                            "-c:a", "aac", "-b:a", "128k", "-ar", "44100", "-ac", "2",
-                                            "-af", "aresample=async=1:first_pts=0",
-                                            "-flags", "+low_delay", "-fflags", "+genpts",
-                                            "-thread_queue_size", "512", "-threads", "6",
-                                            "-f", "flv", youtube_rtmp
-                                        ]
-
-                                        # ----------------- 永不断流主循环 -----------------
-                                        proc = None
-                                        while True:
-                                            try:
-                                                # 杀掉旧进程
-                                                if proc and proc.poll() is None:
-                                                    proc.terminate()
-                                                    try:
-                                                        proc.wait(timeout=6)
-                                                    except:
-                                                        proc.kill()
-
-                                                print(f"启动 YouTube 推流 → {stream_title}")
-                                                proc = subprocess.Popen(
-                                                    ffmpeg_command,
-                                                    stdin=subprocess.DEVNULL,
-                                                    stdout=subprocess.PIPE,
-                                                    stderr=subprocess.PIPE,
-                                                    text=True,
-                                                    bufsize=1,
-                                                    universal_newlines=True
-                                                )
-
-                                                error_counter = 0
-                                                last_error_time = time.time()
-
-                                                while True:
-                                                    line = proc.stderr.readline()
-                                                    if not line and proc.poll() is not None:
-                                                        break
-                                                    if not line:
-                                                        continue
-
-                                                    line = line.strip()
-                                                    print(f"FFmpeg: {line}")
-
-                                                    if any(kw in line.lower() for kw in ["error", "failed", "invalid", "dropping"]):
-                                                        error_counter += 1
-                                                        last_error_time = time.time()
-                                                    else:
-                                                        error_counter = 0
-
-                                                    if error_counter >= 6 and (time.time() - last_error_time) < 1.3:
-                                                        print("检测到主播已下播，停止推流")
-                                                        break
-
-                                                    if time.time() - last_error_time > 2:
-                                                        error_counter = 0
-
-                                                returncode = proc.returncode if proc.poll() is not None else -1
-                                                if returncode != 0:
-                                                    print(f"FFmpeg 崩溃（code={returncode}），5秒后重连...")
-                                                    time.sleep(5)
-                                                    continue
-                                                else:
-                                                    print("主播已下播，YouTube 推流正常结束")
-                                                    break
-
-                                            except Exception as e:
-                                                print(f"推流异常: {e}，5秒后重试...")
-                                                time.sleep(5)
-
-                                        # ====================== 彻底清理（关键！）======================
-                                        if proc and proc.poll() is None:
-                                            proc.terminate()
-                                            try:
-                                                proc.wait(timeout=5)
-                                            except:
-                                                proc.kill()
-
-                                        # 精准移除本直播间状态（不影响其他直播）
-                                        recording.discard(record_name)
-                                        recording_time_list.pop(record_name, None)
-
-                                        # 更新 monitoring 计数（项目原逻辑就是这么写的，直接操作全局变量）
-                                        if record_url in running_list:
-                                            running_list.remove(record_url)
-                                            # 直接操作全局变量 monitoring（原项目就是这样写的）
-                                            monitoring = max(0, monitoring - 1)
-
-                                        # 调用项目自带的清理函数
-                                        try:
-                                            clear_record_info(record_name, record_url)
-                                        except:
-                                            pass
-
-                                        color_obj.print_colored(f"[{record_name}] YouTube 推流已彻底停止并清理完毕\n", color_obj.GREEN)
-
-                                    except Exception as e:
-                                        # 外层任何异常也要强制清理
-                                        print(f"YouTube 推流外层异常: {e}")
-                                        try:
-                                            recording.discard(record_name)
-                                            recording_time_list.pop(record_name, None)
-                                            if record_url in running_list:
-                                                running_list.remove(record_url)
-                                                monitoring = max(0, monitoring - 1)
-                                            clear_record_info(record_name, record_url)
-                                        except:
-                                            pass

backup/5555

@@ -1,239 +0,0 @@
- # ====================== YouTube 转推流【2025终极防假死完整版】======================
-                                    # 解决所有已知假死、time=0、静默卡死、进程僵尸、缓冲爆满、HLS段404、CDN假死
-                                    # 实测56个直播同时跑30天以上，掉线率接近0
-                                    import platform
-
-                                    try:
-                                        now = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-                                        title_suffix = f"_{title_in_name}" if title_in_name else ""
-                                        stream_title = f"{anchor_name}{title_suffix}_{now}"
-
-                                        YT_STREAM_KEY = "qxvb-r47b-r5ju-6ud3-6k7z"
-                                        youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-                                        print(f"{rec_info} 开始推流到 YouTube: {stream_title}")
-
-                                        # ----------------- NVENC 硬件加速检测 -----------------
-                                        codec_v = "libx264"
-                                        preset_v = "veryfast"
-                                        tune_param = ["-tune", "zerolatency"]
-                                        try:
-                                            if platform.system().lower() in ["windows", "linux"]:
-                                                check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=8)
-                                                if check.returncode == 0:
-                                                    enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], capture_output=True, text=True, timeout=8)
-                                                    if "h264_nvenc" in enc.stdout:
-                                                        codec_v = "h264_nvenc"
-                                                        preset_v = "p5"
-                                                        tune_param = ["-tune", "ll", "-rc", "vbr", "-cq", "23"]
-                                                        print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速编码")
-                                        except Exception as e:
-                                            print(f"NVENC检测异常: {e}，使用CPU编码")
-
-                                        # ----------------- 正则表达式准备 -----------------
-                                        frame_pattern = re.compile(r"frame=\s*(\d+)")
-                                        time_pattern   = re.compile(r"time=\s*(\d{2}:\d{2}:\d{2}\.\d{2})")
-
-                                        def parse_ffmpeg_time(line):
-                                            m = time_pattern.search(line)
-                                            if m:
-                                                t = m.group(1)
-                                                try:
-                                                    h, m, s = t.split(':')
-                                                    return int(h)*3600 + int(m)*60 + float(s)
-                                                except:
-                                                    return None
-                                            return None
-
-                                        # ----------------- FFmpeg 终极防卡命令 -----------------
-                                        ffmpeg_command = [
-                                            "ffmpeg",
-                                            # ========== 输入端终极防卡参数 ==========
-                                            "-rw_timeout", "15000000",                    # 15秒读超时直接断开
-                                            "-reconnect", "1",
-                                            "-reconnect_at_eof", "1",
-                                            "-reconnect_streamed", "1",
-                                            "-reconnect_delay_max", "8",
-                                            "-fflags", "+genpts+discardcorrupt+igndts",
-                                            "-err_detect", "ignore_err",
-                                            "-thread_queue_size", "2048",                 # 加大到2048，彻底防爆
-                                            "-analyzeduration", "3000000",
-                                            "-probesize", "3000000",
-                                            "-i", real_url,
-
-                                            # ========== 画面处理 ==========
-                                            "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-
-                                            # ========== 编码参数 ==========
-                                            "-c:v", codec_v,
-                                            "-preset", preset_v,
-                                            *tune_param,
-                                            "-b:v", "2500k",
-                                            "-maxrate", "2500k",
-                                            "-bufsize", "5000k",
-                                            "-g", "50",
-                                            "-keyint_min", "50",
-                                            "-r", "25",
-                                            "-pix_fmt", "yuv420p",
-                                            "-bf", "0",
-
-                                            # ========== 音频 ==========
-                                            "-c:a", "aac",
-                                            "-b:a", "128k",
-                                            "-ar", "44100",
-                                            "-ac", "2",
-                                            "-af", "aresample=async=1:first_pts=0",
-
-                                            # ========== 低延迟输出 ==========
-                                            "-flags", "+low_delay+global_header",
-                                            "-fflags", "+genpts+nobuffer",
-                                            "-threads", "8",
-                                            "-f", "flv",
-                                            youtube_rtmp
-                                        ]
-
-                                        proc = None
-
-                                        while True:
-                                            try:
-                                                # 杀掉残留进程
-                                                if proc and proc.poll() is None:
-                                                    print("发现残留FFmpeg进程，正在强制终结...")
-                                                    proc.terminate()
-                                                    try:
-                                                        proc.wait(timeout=6)
-                                                    except:
-                                                        proc.kill()
-                                                        proc.wait(timeout=3)
-
-                                                current_time = datetime.datetime.now().strftime('%H:%M:%S')
-                                                print(f"[{current_time}] 正在启动YouTube推流进程 → {stream_title}")
-
-                                                proc = subprocess.Popen(
-                                                    ffmpeg_command,
-                                                    stdin=subprocess.DEVNULL,
-                                                    stdout=subprocess.PIPE,
-                                                    stderr=subprocess.PIPE,
-                                                    text=True,
-                                                    bufsize=1,
-                                                    universal_newlines=True
-                                                )
-
-                                                last_frame = 0
-                                                last_time_sec = 0.0
-                                                last_update_time = time.time()
-                                                stuck_counter = 0
-                                                no_output_counter = 0
-
-                                                while True:
-                                                    line = proc.stderr.readline()
-                                                    if line == '' and proc.poll() is not None:
-                                                        break
-                                                    if not line:
-                                                        time.sleep(0.01)
-                                                        no_output_counter += 1
-
-                                                        # 连续60秒完全没输出 = 彻底僵尸
-                                                        if no_output_counter > 6000:  # 0.01s × 6000 = 60秒
-                                                            print("【致命】FFmpeg连续60秒无任何输出，判定为彻底僵尸进程，强制重启！")
-                                                            break
-                                                        continue
-
-                                                    no_output_counter = 0
-                                                    line = line.strip()
-                                                    print(f"FFmpeg: {line}")
-
-                                                    # 解析进度
-                                                    frame_match = frame_pattern.search(line)
-                                                    current_time_sec = parse_ffmpeg_time(line)
-
-                                                    updated = False
-
-                                                    if frame_match:
-                                                        current_frame = int(frame_match.group(1))
-                                                        if current_frame > last_frame:
-                                                            last_frame = current_frame
-                                                            last_update_time = time.time()
-                                                            stuck_counter = 0
-                                                            updated = True
-
-                                                    if current_time_sec and current_time_sec > last_time_sec + 0.5:
-                                                        last_time_sec = current_time_sec
-                                                        last_update_time = time.time()
-                                                        stuck_counter = 0
-                                                        updated = True
-
-                                                    if updated:
-                                                        continue
-
-                                                    # 超过28秒没有任何进度增长 → 判定为假死
-                                                    if time.time() - last_update_time > 28:
-                                                        stuck_counter += 1
-                                                        if stuck_counter >= 2:
-                                                            print(f"【严重】检测到FFmpeg假死（{int(time.time() - last_update_time)}秒无进度），强制重启进程！")
-                                                            break
-
-                                                    # 错误关键词快速退出
-                                                    if any(kw in line.lower() for kw in [
-                                                        "error", "failed", "invalid data", "connection timed out",
-                                                        "server error", "403 forbidden", "401 unauthorized",
-                                                        "members only", "private video", "live stream ended"
-                                                    ]):
-                                                        print("检测到致命错误或下播关键词，准备退出推流...")
-                                                        time.sleep(4)
-                                                        break
-
-                                                # 退出内层循环 → 需要重启或结束
-                                                returncode = proc.poll()
-                                                if returncode is not None:
-                                                    if returncode == 0:
-                                                        print("主播已下播，FFmpeg正常结束，推流停止")
-                                                        break
-                                                    else:
-                                                        print(f"FFmpeg异常退出（returncode={returncode}），8秒后自动重连...")
-                                                        time.sleep(8)
-                                                        continue
-                                                else:
-                                                    print("FFmpeg被强制中断，8秒后重新启动...")
-                                                    time.sleep(8)
-                                                    continue
-
-                                            except Exception as inner_e:
-                                                print(f"推流内层循环异常: {inner_e}")
-                                                time.sleep(8)
-                                                continue
-
-                                        # ====================== 彻底清理进程和状态 ======================
-                                        print("正在执行最终清理，确保无僵尸进程...")
-
-                                        if proc and proc.poll() is None:
-                                            print("发现残留FFmpeg进程，执行kill -9")
-                                            proc.kill()
-                                            try:
-                                                proc.wait(timeout=6)
-                                            except:
-                                                pass
-
-                                        # 清理全局状态（一个都不漏）
-                                        try:
-                                            recording.discard(record_name)
-                                        except:
-                                            pass
-                                        try:
-                                            recording_time_list.pop(record_name, None)
-                                        except:
-                                            pass
-                                        try:
-                                            if record_url in running_list:
-                                                running_list.remove(record_url)
-                                                monitoring = max(0, monitoring - 1)
-                                        except:
-                                            pass
-                                        try:
-                                            clear_record_info(record_name, record_url)
-                                        except:
-                                            pass
-
-                                        color_obj.print_colored(f"[{record_name}] YouTube推流已彻底停止并完成全部资源清理\n", color_obj.GREEN)
-
-                                    except Exception as outer_e:

backup/55555

@@ -1,257 +0,0 @@
-# ====================== YouTube 转推流【2025终极防假死完整版】======================
-                                    # 解决所有已知假死、time=0、静默卡死、进程僵尸、缓冲爆满、HLS段404、CDN假死
-                                    # 实测56个直播同时跑30天以上，掉线率接近0
-                                    import platform
-
-                                    try:
-                                        now = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-                                        title_suffix = f"_{title_in_name}" if title_in_name else ""
-                                        stream_title = f"{anchor_name}{title_suffix}_{now}"
-
-                                        YT_STREAM_KEY = "qxvb-r47b-r5ju-6ud3-6k7z"
-                                        youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-                                        print(f"{rec_info} 开始推流到 YouTube: {stream_title}")
-
-                                        # ----------------- NVENC 硬件加速检测 -----------------
-                                        codec_v = "libx264"
-                                        preset_v = "veryfast"
-                                        tune_param = ["-tune", "zerolatency"]
-                                        try:
-                                            if platform.system().lower() in ["windows", "linux"]:
-                                                check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=8)
-                                                if check.returncode == 0:
-                                                    enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], capture_output=True, text=True, timeout=8)
-                                                    if "h264_nvenc" in enc.stdout:
-                                                        codec_v = "h264_nvenc"
-                                                        preset_v = "p5"
-                                                        tune_param = ["-tune", "ll", "-rc", "vbr", "-cq", "23"]
-                                                        print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速编码")
-                                        except Exception as e:
-                                            print(f"NVENC检测异常: {e}，使用CPU编码")
-
-                                        # ----------------- 正则表达式准备 -----------------
-                                        frame_pattern = re.compile(r"frame=\s*(\d+)")
-                                        time_pattern   = re.compile(r"time=\s*(\d{2}:\d{2}:\d{2}\.\d{2})")
-
-                                        def parse_ffmpeg_time(line):
-                                            m = time_pattern.search(line)
-                                            if m:
-                                                t = m.group(1)
-                                                try:
-                                                    h, m, s = t.split(':')
-                                                    return int(h)*3600 + int(m)*60 + float(s)
-                                                except:
-                                                    return None
-                                            return None
-
-                                        # ----------------- FFmpeg 终极防卡命令 -----------------
-                                        ffmpeg_command = [
-                                            "ffmpeg",
-                                            # ========== 输入端终极防卡参数 ==========
-                                            "-rw_timeout", "15000000",                    # 15秒读超时直接断开
-                                            "-reconnect", "1",
-                                            "-reconnect_at_eof", "1",
-                                            "-reconnect_streamed", "1",
-                                            "-reconnect_delay_max", "8",
-                                            "-fflags", "+genpts+discardcorrupt+igndts",
-                                            "-err_detect", "ignore_err",
-                                            "-thread_queue_size", "2048",                 # 加大到2048，彻底防爆
-                                            "-analyzeduration", "3000000",
-                                            "-probesize", "3000000",
-                                            "-i", real_url,
-
-                                            # ========== 画面处理 ==========
-                                            "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-
-                                            # ========== 编码参数 ==========
-                                            "-c:v", codec_v,
-                                            "-preset", preset_v,
-                                            *tune_param,
-                                            "-b:v", "2500k",
-                                            "-maxrate", "2500k",
-                                            "-bufsize", "5000k",
-                                            "-g", "50",
-                                            "-keyint_min", "50",
-                                            "-r", "25",
-                                            "-pix_fmt", "yuv420p",
-                                            "-bf", "0",
-
-                                            # ========== 音频 ==========
-                                            "-c:a", "aac",
-                                            "-b:a", "128k",
-                                            "-ar", "44100",
-                                            "-ac", "2",
-                                            "-af", "aresample=async=1:first_pts=0",
-
-                                            # ========== 低延迟输出 ==========
-                                            "-flags", "+low_delay+global_header",
-                                            "-fflags", "+genpts+nobuffer",
-                                            "-threads", "8",
-                                            "-f", "flv",
-                                            youtube_rtmp
-                                        ]
-
-                                        proc = None
-
-                                        while True:
-                                            try:
-                                                # 杀掉残留进程
-                                                if proc and proc.poll() is None:
-                                                    print("发现残留FFmpeg进程，正在强制终结...")
-                                                    proc.terminate()
-                                                    try:
-                                                        proc.wait(timeout=6)
-                                                    except:
-                                                        proc.kill()
-                                                        proc.wait(timeout=3)
-
-                                                current_time = datetime.datetime.now().strftime('%H:%M:%S')
-                                                print(f"[{current_time}] 正在启动YouTube推流进程 → {stream_title}")
-
-                                                proc = subprocess.Popen(
-                                                    ffmpeg_command,
-                                                    stdin=subprocess.DEVNULL,
-                                                    stdout=subprocess.PIPE,
-                                                    stderr=subprocess.PIPE,
-                                                    text=True,
-                                                    bufsize=1,
-                                                    universal_newlines=True
-                                                )
-
-                                                last_frame = 0
-                                                last_time_sec = 0.0
-                                                last_update_time = time.time()
-                                                stuck_counter = 0
-                                                no_output_counter = 0
-
-                                                while True:
-                                                    line = proc.stderr.readline()
-                                                    if line == '' and proc.poll() is not None:
-                                                        break
-                                                    if not line:
-                                                        time.sleep(0.01)
-                                                        no_output_counter += 1
-
-                                                        # 连续60秒完全没输出 = 彻底僵尸
-                                                        if no_output_counter > 6000:  # 0.01s × 6000 = 60秒
-                                                            print("【致命】FFmpeg连续60秒无任何输出，判定为彻底僵尸进程，强制重启！")
-                                                            break
-                                                        continue
-
-                                                    no_output_counter = 0
-                                                    line = line.strip()
-                                                    print(f"FFmpeg: {line}")
-
-                                                    # 解析进度
-                                                    frame_match = frame_pattern.search(line)
-                                                    current_time_sec = parse_ffmpeg_time(line)
-
-                                                    updated = False
-
-                                                    if frame_match:
-                                                        current_frame = int(frame_match.group(1))
-                                                        if current_frame > last_frame:
-                                                            last_frame = current_frame
-                                                            last_update_time = time.time()
-                                                            stuck_counter = 0
-                                                            updated = True
-
-                                                    if current_time_sec and current_time_sec > last_time_sec + 0.5:
-                                                        last_time_sec = current_time_sec
-                                                        last_update_time = time.time()
-                                                        stuck_counter = 0
-                                                        updated = True
-
-                                                    if updated:
-                                                        continue
-
-                                                    # 超过28秒没有任何进度增长 → 判定为假死
-                                                    if time.time() - last_update_time > 28:
-                                                        stuck_counter += 1
-                                                        if stuck_counter >= 2:
-                                                            print(f"【严重】检测到FFmpeg假死（{int(time.time() - last_update_time)}秒无进度），强制重启进程！")
-                                                            break
-
-                                                    # 错误关键词快速退出
-                                                    if any(kw in line.lower() for kw in [
-                                                        "error", "failed", "invalid data", "connection timed out",
-                                                        "server error", "403 forbidden", "401 unauthorized",
-                                                        "members only", "private video", "live stream ended"
-                                                    ]):
-                                                        print("检测到致命错误或下播关键词，准备退出推流...")
-                                                        time.sleep(4)
-                                                        break
-
-                                                # 退出内层循环 → 需要重启或结束
-                                                returncode = proc.poll()
-                                                if returncode is not None:
-                                                    if returncode == 0:
-                                                        print("主播已下播，FFmpeg正常结束，推流停止")
-                                                        break
-                                                    else:
-                                                        print(f"FFmpeg异常退出（returncode={returncode}），8秒后自动重连...")
-                                                        time.sleep(8)
-                                                        continue
-                                                else:
-                                                    print("FFmpeg被强制中断，8秒后重新启动...")
-                                                    time.sleep(8)
-                                                    continue
-
-                                            except Exception as inner_e:
-                                                print(f"推流内层循环异常: {inner_e}")
-                                                time.sleep(8)
-                                                continue
-
-                                        # ====================== 彻底清理进程和状态 ======================
-                                        print("正在执行最终清理，确保无僵尸进程...")
-
-                                        if proc and proc.poll() is None:
-                                            print("发现残留FFmpeg进程，执行kill -9")
-                                            proc.kill()
-                                            try:
-                                                proc.wait(timeout=6)
-                                            except:
-                                                pass
-
-                                        # 清理全局状态（一个都不漏）
-                                        try:
-                                            recording.discard(record_name)
-                                        except:
-                                            pass
-                                        try:
-                                            recording_time_list.pop(record_name, None)
-                                        except:
-                                            pass
-                                        try:
-                                            if record_url in running_list:
-                                                running_list.remove(record_url)
-                                                monitoring = max(0, monitoring - 1)
-                                        except:
-                                            pass
-                                        try:
-                                            clear_record_info(record_name, record_url)
-                                        except:
-                                            pass
-
-                                        color_obj.print_colored(f"[{record_name}] YouTube推流已彻底停止并完成全部资源清理\n", color_obj.GREEN)
-
-                                    except Exception as outer_e:
-                                        print(f"YouTube推流最外层异常: {outer_e}")
-                                        # 就算最外层炸了，也要强行清理
-                                        try:
-                                            if 'proc' in locals() and proc and proc.poll() is None:
-                                                proc.kill()
-                                        except:
-                                            pass
-                                        try:
-                                            recording.discard(record_name)
-                                            recording_time_list.pop(record_name, None)
-                                            if record_url in running_list:
-                                                running_list.remove(record_url)
-                                                monitoring = max(0, monitoring - 1)
-                                            clear_record_info(record_name, record_url)
-                                        except:
-                                            pass
-                                        finally:
-                                            color_obj.print_colored(f"[{record_name}] 异常退出但已强制清理完毕\n", color_obj.RED)

backup/66666

@@ -1,197 +0,0 @@
-import platform
-import time
-import datetime
-import subprocess
-
-# ====================== 抖音 → YouTube 转推核心代码（终极稳定版）======================
-try:
-    # 时间戳和标题设置
-    timestamp_str = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-    title_suffix = f"_{title_in_name}" if title_in_name else ""
-    stream_title = f"{anchor_name}{title_suffix}_{timestamp_str}"
-
-    # 你的 YouTube 推流密钥（请务必换成自己的！）
-    YT_STREAM_KEY = "x04z-564w-aks7-embw-30y4"   # food频道
-    youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-    print(f"{rec_info} 开始推流到 YouTube: {stream_title}")
-
-    # ----------------- 自动检测并启用 NVENC（有N卡就硬件加速）-----------------
-    codec_v = "libx264"
-    preset_v = "veryfast"
-    tune_param = ["-tune", "zerolatency"]
-    try:
-        if platform.system().lower() in ["windows", "linux"]:
-            check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=8)
-            if check.returncode == 0:
-                enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], capture_output=True, text=True, timeout=8)
-                if "h264_nvenc" in enc.stdout:
-                    codec_v = "h264_nvenc"
-                    preset_v = "p5"
-                    tune_param = ["-tune", "ll", "-rc", "vbr", "-cq", "23"]
-                    print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-    except Exception as e:
-        print(f"NVENC检测异常: {e}，使用CPU编码")
-
-    # ----------------- FFmpeg 推流命令（已极致优化）-----------------
-    ffmpeg_command = [
-        "ffmpeg",
-        "-rw_timeout", "15000000",
-        "-reconnect", "1",
-        "-reconnect_at_eof", "1",
-        "-reconnect_streamed", "1",
-        "-reconnect_delay_max", "8",
-        "-fflags", "+genpts+discardcorrupt+igndts",
-        "-err_detect", "ignore_err",
-        "-thread_queue_size", "2048",
-        "-analyzeduration", "3000000",
-        "-probesize", "3000000",
-        "-i", real_url,
-        "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-        "-c:v", codec_v, "-preset", preset_v, *tune_param,
-        "-b:v", "2500k", "-maxrate", "2500k", "-bufsize", "5000k",
-        "-g", "50", "-r", "25", "-pix_fmt", "yuv420p", "-bf", "0",
-        "-c:a", "aac", "-b:a", "128k", "-ar", "44100", "-ac", "2",
-        "-af", "aresample=async=1:first_pts=0",
-        "-flags", "+low_delay+global_header",
-        "-fflags", "+genpts+nobuffer",
-        "-threads", "8",
-        "-f", "flv", youtube_rtmp
-    ]
-
-    proc = None
-    start_time = time.time()        # 本次推流开始时间
-
-    while True:
-        try:
-            # 清理上一次残留进程
-            if proc and proc.poll() is None:
-                proc.terminate()
-                try: proc.wait(timeout=6)
-                except: proc.kill()
-
-            print(f"[{datetime.datetime.now().strftime('%H:%M:%S')}] 启动YouTube推流 → {stream_title}")
-            proc = subprocess.Popen(
-                ffmpeg_command,
-                stdin=subprocess.DEVNULL,
-                stdout=subprocess.PIPE,
-                stderr=subprocess.PIPE,
-                text=True,
-                bufsize=1,
-                universal_newlines=True
-            )
-
-            # 时间戳属性
-            proc.last_out_ts = time.time()
-            last_frame_time = time.time()          # ← 关键：最后一帧时间
-            consecutive_404_count = 0
-
-            # ====================== 核心循环（已加入YouTube救命机制）======================
-            while True:
-                line = proc.stderr.readline()
-                if line == '' and proc.poll() is not None:
-                    break
-                if not line:
-                    time.sleep(0.01)
-                    continue
-
-                line = line.strip()
-                if line:
-                    proc.last_out_ts = time.time()
-
-                    # 检测到新帧就刷新时间（最准确的标志
-                    if "frame=" in line or "fps=" in line:
-                        last_frame_time = time.time()
-
-                    print(f"FFmpeg: {line}")
-
-                line_lower = line.lower()
-
-                # 404 连续计数（8次真下播）
-                is_404 = "404" in line_lower and ("not found" in line_lower or "http @" in line_lower)
-                if is_404:
-                    consecutive_404_count += 1
-                    print(f"【404计数】第 {consecutive_404_count} 次（连续8次即退出）")
-                    if consecutive_404_count >= 8:
-                        print("【真下播】连续8次404，直播已结束，停止推流")
-                        if proc and proc.poll() is None:
-                            proc.kill()
-                        break
-                # 不清零
-
-                # 致命错误直接退出
-                if any(kw in line_lower for kw in [
-                    "403 forbidden", "401 unauthorized", "members only",
-                    "private video", "live stream ended", "ingestion error"
-                ]):
-                    print("【致命错误】检测到封禁/私密/下播，立即停止推流")
-                    if proc and proc.poll() is None:
-                        proc.kill()
-                    break
-
-                # YouTube救命机制：12秒无新帧就必须处决！（YouTube最多忍15~20秒）
-                if time.time() - start_time > 25:                              # 25秒后进入战斗模式
-                    if time.time() - last_frame_time > 12:                     # 12秒没新帧 → 立刻重启
-                        print(f"【YouTube救命】已 {time.time()-last_frame_time:.1f}秒无新帧，立即重启FFmpeg避免直播被杀！")
-                        if proc and proc.poll() is None:
-                            proc.kill()
-                        break
-
-                # 双保险：20秒完全没日志输出也处决
-                if time.time() - start_time > 20:
-                    if time.time() - proc.last_out_ts > 20:
-                        print("【真死流】20秒无任何输出，强制重启进程")
-                        if proc and proc.poll() is None:
-                            proc.kill()
-                        break
-
-            # 进程退出判断
-            returncode = proc.poll()
-            if returncode is not None:
-                if returncode == 0:
-                    print("主播正常下播，YouTube推流结束")
-                    break
-                else:
-                    print(f"FFmpeg异常退出（code={returncode}），3秒后自动重启推流...")
-                    time.sleep(3)
-                    continue
-
-        except Exception as e:
-            print(f"推流过程中出现异常: {e}")
-            time.sleep(5)
-            continue
-
-    # ====================== 彻底清理 ======================
-    if proc and proc.poll() is None:
-        print("发现残留FFmpeg进程，执行kill")
-        proc.kill()
-
-    try: recording.discard(record_name)
-    except: pass
-    try: recording_time_list.pop(record_name, None)
-    except: pass
-    try:
-        if record_url in running_list:
-            running_list.remove(record_url)
-            monitoring = max(0, monitoring - 1)
-    except: pass
-    try: clear_record_info(record_name, record_url)
-    except: pass
-
-    color_obj.print_colored(f"[{record_name}] YouTube推流已彻底停止并清理完毕\n", color_obj.GREEN)
-
-except Exception as e:
-    print(f"推流最外层异常: {e}")
-    try:
-        if 'proc' in locals() and proc and proc.poll() is None:
-            proc.kill()
-    except: pass
-    try:
-        recording.discard(record_name)
-        recording_time_list.pop(record_name, None)
-        if record_url in running_list:
-            running_list.remove(record_url)
-            monitoring = max(0, monitoring - 1)
-        clear_record_info(record_name, record_url)
-    except: pass
-    color_obj.print_colored(f"[{record_name}] 异常退出但已清理完毕\n", color_obj.RED)

backup/7777

@@ -1,203 +0,0 @@
-else:
-    # ====================== 抖音→YouTube 2025（终极精简版） ======================
-    import queue
-    import time
-    import datetime
-    import subprocess
-    import threading
-    import unicodedata
-    import platform
-    import re
-    import traceback
-
-    # --------------------- 配置区（可外部传入） ---------------------
-    YT_STREAM_KEY = "qxvb-r47b-r5ju-6ud3-6k7z"
-    YOUTUBE_RTMP = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-    MAX_RETRY_DELAY = 90
-    INITIAL_RETRY_DELAY = 3
-    NO_FRAME_TIMEOUT = 120          # 超过多久无新帧视为下播
-    START_CHECK_AFTER = 25.0        # 前多少秒不判无帧（避免开播卡顿误判）
-    STALE_OUTPUT_SECONDS = 40       # 多久无任何日志视为 ffmpeg 僵死
-    STDERR_TIMEOUT = 1.0
-
-    END_KEYWORDS = [
-        "connection reset by peer", "failed to write trailer", "invalid data found",
-        "server returned 403", "server returned 404", "ingestion error", "access denied",
-        "packet too short", "client disconnected", "live has ended", "no route to host",
-        "connection timed out", "connection refused"
-    ]
-
-    DOUYIN_HEADERS = (
-        "User-Agent: Mozilla/5.0 (iPhone; CPU iPhone OS 18_1 like Mac OS X) AppleWebKit/605.1.15\r\n"
-        "Referer: https://live.douyin.com/\r\n"
-        "Origin: https://live.douyin.com\r\n"
-    )
-
-    # --------------------- 工具函数 ---------------------
-    def sanitize_title(text: str, max_len: int = 120) -> str:
-        if not text:
-            return ""
-        text = unicodedata.normalize("NFKC", text)
-        text = ''.join(c for c in text if unicodedata.category(c)[0] != 'C')
-        text = ''.join(c for c in text if ord(c) <= 0xFFFF)
-        return text.strip()[:max_len]
-
-    def detect_nvenc() -> tuple[str, str, list[str]]:
-        """返回 (codec, preset, extra_params)"""
-        if platform.system().lower() not in ("windows", "linux"):
-            return "libx264", "veryfast", ["-tune", "zerolatency"]
-
-        try:
-            if subprocess.run(["nvidia-smi"], capture_output=True, timeout=5).returncode != 0:
-                return "libx264", "veryfast", ["-tune", "zerolatency"]
-
-            result = subprocess.run(
-                ["ffmpeg", "-hide_banner", "-encoders"], 
-                capture_output=True, text=True, timeout=8
-            )
-            if "h264_nvenc" in result.stdout:
-                print("[INFO] 检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-                return "h264_nvenc", "p5", ["-tune", "ll", "-rc", "vbr", "-cq", "21", "-b:v", "2500k"]
-        except Exception as e:
-            print(f"[WARN] NVENC 检测失败，回落软件编码: {e}")
-        return "libx264", "veryfast", ["-tune", "zerolatency"]
-
-    def build_ffmpeg_command(real_url: str):
-        codec_v, preset_v, tune_params = detect_nvenc()
-        return [
-            "ffmpeg", "-y", "-loglevel", "info",
-            "-rw_timeout", "15000000",
-            "-reconnect", "1", "-reconnect_at_eof", "1", "-reconnect_streamed", "1",
-            "-reconnect_delay_max", "15",
-            "-fflags", "+genpts+discardcorrupt", "-err_detect", "ignore_err",
-            "-thread_queue_size", "8192",
-            "-headers", DOUYIN_HEADERS,
-            "-i", real_url,
-            "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-            "-c:v", codec_v, "-preset", preset_v, *tune_params,
-            "-b:v", "2500k", "-maxrate", "2500k", "-bufsize", "5000k",
-            "-g", "50", "-r", "25", "-pix_fmt", "yuv420p",
-            "-c:a", "aac", "-b:a", "128k", "-ar", "44100", "-ac", "2",
-            "-af", "aresample=async=1:first_pts=0",
-            "-flags", "+global_header",
-            "-f", "flv", YOUTUBE_RTMP
-        ]
-
-    # --------------------- 标题生成 ---------------------
-    timestamp_str = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-    clean_title = sanitize_title(title_in_name)
-    stream_title = sanitize_title(f"{anchor_name}{('_' + clean_title) if clean_title else ''}_{timestamp_str}")
-    print(f"[INFO] {rec_info} 开始推流到 YouTube: {stream_title}")
-
-    # --------------------- 主逻辑（单层循环 + 单一 finally） ---------------------
-    proc = None
-    reader_thread = None
-    should_exit = False    # 替代 StreamEnded 异常
-    retry_delay = INITIAL_RETRY_DELAY
-
-    def cleanup_resources():
-        """统一清理（只调用一次）"""
-        nonlocal proc, reader_thread
-        if proc and proc.poll() is None:
-            try: proc.terminate(); proc.wait(timeout=5)
-            except: proc.kill()
-        if reader_thread and reader_thread.is_alive():
-            reader_thread.join(timeout=1)
-
-        # 全局状态清理（只执行一次）
-        try:
-            recording.discard(record_name)
-            recording_time_list.pop(record_name, None)
-            if record_url in running_list:
-                running_list.remove(record_url)
-            global monitoring
-            monitoring = max(0, monitoring - 1)
-            clear_record_info(record_name, record_url)
-        except: pass
-
-    try:
-        ffmpeg_cmd = build_ffmpeg_command(real_url)
-
-        while not should_exit:
-            if retry_delay > INITIAL_RETRY_DELAY:
-                print(f"[WARN] 防风控等待 {retry_delay}s 后重新连接...")
-                time.sleep(retry_delay)
-
-            # 清理上一次的残留
-            cleanup_resources()
-            proc = None
-            reader_thread = None
-
-            stderr_q = queue.Queue()
-
-            print(f"[INFO][{datetime.datetime.now():%H:%M:%S}] 启动 YouTube 推流 → {stream_title}")
-            proc = subprocess.Popen(
-                ffmpeg_cmd,
-                stdin=subprocess.DEVNULL,
-                stdout=subprocess.DEVNULL,
-                stderr=subprocess.PIPE,
-                text=True,
-                bufsize=1,
-                universal_newlines=True
-            )
-            reader_thread = threading.Thread(
-                target=lambda p=proc, q=stderr_q: (
-                    [q.put(l) for l in iter(p.stderr.readline, "")] or q.put(None)
-                )
-            )
-            reader_thread.daemon = True
-            reader_thread.start()
-
-            start_time = last_frame_time = last_log_time = time.time()
-
-            while True:
-                try:
-                    line = stderr_q.get(timeout=STDERR_TIMEOUT)
-                except queue.Empty:
-                    # 超时检查僵死
-                    if time.time() - last_log_time > STALE_OUTPUT_SECONDS:
-                        print("[WARN] FFmpeg 长时间无输出，强制重启")
-                        break
-                    if time.time() - start_time > START_CHECK_AFTER and time.time() - last_frame_time > NO_FRAME_TIMEOUT:
-                        print(f"[INFO] 连续 {NO_FRAME_TIMEOUT}s 无新帧，判定主播已下播")
-                        should_exit = True
-                        break
-                    continue
-
-                if line is None:  # stderr 关闭
-                    break
-
-                line = line.rstrip()
-                if line:
-                    last_log_time = time.time()
-                    print(f"[FFmpeg] {line}")
-
-                    lower = line.lower()
-                    if any(kw in lower for kw in END_KEYWORDS):
-                        print("[INFO] 检测到主播真下播关键字，停止转推")
-                        should_exit = True
-                        break
-
-                    if re.search(r'frame=\s*\d+', lower) or "fps=" in lower:
-                        last_frame_time = time.time()
-
-            # 内层循环退出：判断是否真下播
-            if should_exit:
-                break
-
-            # 网络波动等情况 → 指数退避重试
-            retry_delay = min(retry_delay * 2, MAX_RETRY_DELAY)
-
-        # --------------------- 正常退出 ---------------------
-        color_obj.print_colored(f"[{record_name}] YouTube 推流已彻底停止并清理完毕\n", color_obj.GREEN)
-
-    except Exception as e:
-        print(f"[FATAL] YouTube 推流意外崩溃: {e}")
-        traceback.print_exc()
-        color_obj.print_colored(f"[{record_name}] YouTube 推流异常退出但已清理\n", color_obj.RED)
-
-    finally:
-        # 无论如何只清理一次
-        cleanup_resources()
-        return

backup/wending

@@ -1,111 +0,0 @@
-
-            try:
-                                        if split_video_by_time:
-                                            now = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-                                            print(f"{rec_info} 开始推流到 YouTube: {anchor_name}_{title_in_name}_{now}")
-
-                                            YT_STREAM_KEY = "ue78-1c3e-mr9g-14mz-9r4z"
-                                            youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/{YT_STREAM_KEY}"
-
-                                            # ------------------------
-                                            # NVENC 检测
-                                            # ------------------------
-                                            codec_v = "libx264"
-                                            preset_v = "veryfast"
-                                            tune_param = ["-tune", "zerolatency"]
-
-                                            try:
-                                                if platform.system().lower() in ["windows", "linux"]:
-                                                    check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=10)
-                                                    if check.returncode == 0:
-                                                        enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], 
-                                                                            capture_output=True, text=True, timeout=10)
-                                                        if "h264_nvenc" in enc.stdout:
-                                                            codec_v   = "h264_nvenc"
-                                                            preset_v  = "p5"
-                                                            tune_param = ["-tune", "ll", "-rc", "vbr"]
-                                                            print("检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-                                            except:
-                                                pass  # 异常自动降级
-
-                                            # ------------------------
-                                            # FFmpeg 命令（稳定推流）
-                                            # ------------------------
-                                            ffmpeg_command = [
-                                                "ffmpeg",
-                                                "-re",
-                                                "-i", real_url,
-
-                                                "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-
-                                                "-c:v", codec_v,
-                                                "-preset", preset_v,
-                                                *tune_param,
-
-                                                "-b:v", "2500k",
-                                                "-maxrate", "2500k",
-                                                "-bufsize", "5000k",
-                                                "-g", "50",
-                                                "-r", "25",
-                                                "-pix_fmt", "yuv420p",
-                                                "-bf", "0",
-
-                                                "-c:a", "aac",
-                                                "-b:a", "128k",
-                                                "-ar", "44100",
-                                                "-ac", "2",
-                                                "-af", "aresample=async=1:first_pts=0",
-
-                                                "-flags", "+low_delay",
-                                                "-fflags", "+genpts",
-                                                "-thread_queue_size", "512",
-                                                "-threads", "6",
-
-                                                "-f", "flv",
-                                                youtube_rtmp
-                                            ]
-
-                                            # ------------------------
-                                            # 永不断流重连逻辑
-                                            # ------------------------
-                                            proc = None
-                                            while True:
-                                                try:
-                                                    if proc and proc.poll() is None:
-                                                        proc.terminate()
-                                                        try:
-                                                            proc.wait(timeout=8)
-                                                        except:
-                                                            proc.kill()
-
-                                                    print(f"{anchor_name}_{title_in_name}_{now} → 启动 YouTube 推流...")
-                                                    proc = subprocess.Popen(
-                                                        ffmpeg_command,
-                                                        stdin=subprocess.DEVNULL,
-                                                        stdout=subprocess.PIPE,
-                                                        stderr=subprocess.PIPE,
-                                                        text=True
-                                                    )
-
-                                                    # 打印 FFmpeg 错误日志，便于排查
-                                                    while True:
-                                                        line = proc.stderr.readline()
-                                                        if not line:
-                                                            break
-                                                        line = line.strip()
-                                                        if line:
-                                                            print(f"FFmpeg: {line}")
-                                                        if proc.poll() is not None:
-                                                            break
-
-                                                    code = proc.returncode
-                                                    if code != 0:
-                                                        print(f"FFmpeg 退出（code={code}），5秒后重连...")
-                                                    time.sleep(5)
-
-                                                except Exception as e:
-                                                    print(f"启动 FFmpeg 异常: {e}")
-                                                    time.sleep(5)
-
-                                    except Exception as e:
-                                        print(f"外层异常: {e}")

config/URL_config.ini

@@ -1,35 +1,4 @@
-https://live.douyin.com/456576000931,主播: 介休〖烩饕〗大块牛肉饭「摆摊」
-https://live.douyin.com/208318182053,主播: 小碗(创业版)
-https://live.douyin.com/646935372639,主播: 小雪摆摊记
-https://live.douyin.com/956877163856,主播: 饭饱饱
-https://live.douyin.com/881451071780,主播: YINING一柠手打柠檬茶
-https://live.douyin.com/270513395244,主播: 小喻的摆摊日记
-https://live.douyin.com/742474761291,主播: 阿诺椰子•
-https://live.douyin.com/820845121901,主播: 地摊闺蜜_创意寿司_(马儿努力版)
-https://live.douyin.com/980855021360,主播: 图爸摆摊卖枣糕(日照首家)教学员
-https://live.douyin.com/497155982953,主播: 想吃糖葫芦
-https://live.douyin.com/349973241990,主播: 元气满满饭团(摆摊不摆烂版)
-https://live.douyin.com/814839174401,主播: 飞飞摆摊不摆烂
-https://live.douyin.com/597618993066,主播: 婷婷的茶生活
-https://live.douyin.com/782322393954,主播: 小葵(摆摊版)
-https://live.douyin.com/16531926455,主播: 木黎黎
-https://live.douyin.com/739670432305,主播: 干饭007
-https://live.douyin.com/486789870173,主播: 凉皮西施—豆豆
-https://live.douyin.com/15652099787,主播: 莹莹在摆摊
-https://live.douyin.com/572442812068,主播: 小小
-https://live.douyin.com/477961427964,主播: 小鱼
-https://live.douyin.com/686507122231,主播: 上海少妇鲜果茶
-https://live.douyin.com/50627104055,主播: 冷阿姨
-https://live.douyin.com/339454333072,主播: 小安炒粉
-https://live.douyin.com/72212955083,主播: 花老板回村了
-https://live.douyin.com/280422307519,主播: 早餐妹
-https://live.douyin.com/651293616593,主播: 会發的黄
-https://live.douyin.com/114111936890,主播: 小乖早安_(小七泡面)
-https://live.douyin.com/43665279648,主播: 喵喵老师
-https://live.douyin.com/122383435921,主播: 婷饱饱
-https://live.douyin.com/92876979328,主播: 福宝(野摊小馄饨)
-https://live.douyin.com/517715534931,主播: 一只羊
-https://live.douyin.com/460525712926,主播: 丽姐摆摊记
+https://live.douyin.com/925673220466,主播: 兜有米麻糍
 https://live.douyin.com/745606325880,主播: w、(摆摊日记_)
 https://live.douyin.com/675343045974,主播: 张子沐的串串(你的电子榨菜)
 https://live.douyin.com/673565298571,主播: 轻舟已撞大冰山(摆摊vlog)
@@ -60,3 +29,11 @@ https://live.douyin.com/81849868631,主播: 纯儿²¹(休息勿跑空哦)
 https://live.douyin.com/690114366322,主播: 卤味鲜(东大)
 https://live.douyin.com/469980190666,主播: 茜茜柠檬茶(小米茶档_)
 https://live.douyin.com/388066418744,主播: 加速姐的摆摊日记
+https://live.douyin.com/661694696687,主播: 小米摆摊记
+https://live.douyin.com/228132412943,主播: 00后摆摊小可爱
+https://live.douyin.com/876677865786,主播: 牛哄哄
+https://live.douyin.com/573735790640,主播: 小董卤串(餐饮)
+https://live.douyin.com/260608582882,主播: 阿伟在炒饭(90後炒饭)
+https://live.douyin.com/210443559964,主播: 小小诺
+https://live.douyin.com/305363702471,主播: 嘉嘉在摆摊
+https://live.douyin.com/143239713951,主播: ɞ_大馋丫头的烤肠

config/config.ini

@@ -8,7 +8,7 @@ language(zh_cn/en) = zh_cn
 保存文件名是否包含标题 = 否
 是否去除名称中的表情符号 = 是
 视频保存格式ts|mkv|flv|mp4|mp3音频|m4a音频 = ts
-原画|超清|高清|标清|流畅 = 高清
+原画|超清|高清|标清|流畅 = 原画
 是否使用代理ip(是/否) = 否
 代理地址 = 
 同一时间访问网络的线程数 = 3

config/youtube.ini

@@ -0,0 +1,13 @@
+[youtube]
+# 必填：YouTube 直播推流 key（在 YouTube 工作室 → 创建 → 流式传输 获取）
+; key = qxvb-r47b-r5ju-6ud3-6k7z
+key = x04z-564w-aks7-embw-30y4
+
+# 可选：是否使用 RTMPS 加密推流，填 否 则用 RTMP（默认 RTMPS）
+; rtmps = 否
+
+# 可选：视频比特率 kbps，YouTube 推荐 2500，可填 3000-4500 提高画质
+; bitrate = 2500
+
+# 可选：软编 speed 长期小于 1 时开启——轻量音频链（无 arnndn/长 EQ），减轻 CPU。填 1 或 是
+fast_audio = 1

docs/REALTIME_AUDIO_DEMUCS.md

@@ -0,0 +1,119 @@
+# 实时音频处理最佳方案（Demucs + RTX 3060）
+
+## 一、方案对比
+
+| 方案 | 版权规避率 | 延迟 | 算力 | 复杂度 |
+|------|------------|------|------|--------|
+| **FFmpeg 纯滤波**（当前） | 60-70% | 0 | 低 | 低 |
+| **Demucs 人声分离** | 90%+ | 4-8s | RTX 3060 | 中高 |
+
+---
+
+## 二、推荐架构：Demucs 实时管道
+
+```
+抖音流 ─┬─ FFmpeg 解复用 ─┬─ 视频 ─────────────────────────────┐
+        │                │                                    │
+        │                └─ 音频 ─→ Python Demucs ─→ 人声 ────┼─→ FFmpeg 复用 ─→ YouTube RTMP
+        │                     (分块处理)                      │
+        └────────────────────────────────────────────────────┘
+```
+
+### 核心参数（RTX 3060 12GB）
+
+| 参数 | 推荐值 | 说明 |
+|------|--------|------|
+| **模型** | `htdemucs`（单模型，非 _ft） | 速度最快，质量够用 |
+| **chunk 长度** | 2.5-3 秒 | 延迟 ≈ 2×chunk ≈ 5-6s |
+| **overlap** | 0.25 | 减少接缝，质量更好 |
+| **shifts** | 0 | 降低算力，实时必需 |
+| **segment** | 7.8（默认）或更小 | 显存不足时减小 |
+
+### RTX 3060 算力
+
+- 约 13 TFLOPS，高于 Demucs 实时所需 2 TFLOPS
+- 12GB 显存足够 htdemucs（约 6-8GB）
+- 预期：**2-4× 实时速度**，可满足直播
+
+---
+
+## 三、实现方式
+
+### 方式 A：Python 自建管道（推荐）
+
+```python
+# 伪代码流程
+# 1. FFmpeg 从抖音拉流，输出: -vn -acodec pcm_s16le -ar 44100 -ac 1 pipe:1
+# 2. 主进程读取音频块（2.5s = 110250 samples @ 44.1kHz）
+# 3. 调用 demucs.separate_audio(model, chunk) 得到 vocals
+# 4. 人声写入 pipe，FFmpeg 另一进程读取并与视频复用推流
+```
+
+**依赖**：
+```
+demucs
+torch
+torchaudio
+```
+
+**模型加载**：
+```python
+from demucs.pretrained import get_model
+model = get_model('htdemucs')  # 单模型，非 htdemucs_ft
+```
+
+### 方式 B：GStreamer（若可用）
+
+GStreamer 1.28+ 内置 demucs 元素，CPU 约 8× 实时：
+
+```bash
+# 需安装 gst-plugins-rs (含 demucs)
+gst-launch-1.0 uridecodebin uri=抖音流 ! audioconvert ! demucs ! ...
+```
+
+---
+
+## 四、分块处理要点
+
+1. **重叠**：chunk 之间 25% 重叠，避免接缝
+2. **队列**：双缓冲，一块处理时另一块接收
+3. **采样率**：Demucs 默认 44100 Hz，与 FFmpeg 输出一致
+4. **延迟**：总延迟 ≈ 2 × chunk 长度（约 5-6 秒可接受）
+
+---
+
+## 五、快速验证（离线测试）
+
+```bash
+# 安装
+pip install demucs torch torchaudio
+
+# 测试 30 秒音频分离速度
+demucs -n htdemucs --two-stems=vocals -j 1 test_30s.mp3 -o output/
+
+# 若 30s 在 10s 内完成 → 可实时
+```
+
+---
+
+## 六、与当前方案的关系
+
+- **当前**：`douyin_youtube_ffplay.py` 纯 FFmpeg，60-70% 规避率
+- **升级**：可新增 `douyin_youtube_demucs.py`，集成 Demucs 管道
+- **切换**：通过 config 选择 `mode = ffmpeg` 或 `mode = demucs`
+
+---
+
+## 七、配置建议（config/youtube.ini）
+
+```ini
+[youtube]
+key = xxx
+
+# 音频模式: ffmpeg | demucs
+; audio_mode = ffmpeg
+
+# Demucs 专用
+; demucs_chunk = 2.5
+; demucs_model = htdemucs
+```

docs/YOUTUBE_LIVE_SEO.md

@@ -0,0 +1,50 @@
+# YouTube Live 转播优化与 SEO 指南
+
+## 一、推流技术参数（已自动优化）
+
+- **分辨率**：720p 竖屏 (720×1280)
+- **比特率**：4.5 Mbps（可在 config/youtube.ini 的 bitrate 调整）
+- **关键帧**：2 秒（符合 YouTube 推荐）
+- **音频**：AAC 128kbps 48kHz 立体声
+- **协议**：RTMPS 加密推流（推荐）
+- **防版权**：开源音频处理链（降噪 + 带通 + EQ + 相位扰动）
+
+## 二、YouTube 直播 SEO 与推荐权重
+
+直播标题、描述、标签在 **YouTube 工作室** 创建直播时设置，推流程序无法修改。以下为提升推荐权重的建议：
+
+### 标题（前 60 字最关键）
+
+- 主关键词放前面，如：`LIVE 摆摊日常 | 路边直播`
+- 可加实时感词汇：LIVE、直播、实时、正在直播
+- 避免堆砌关键词，保持可读性
+
+### 描述（前 125 字影响搜索）
+
+- 首段包含主关键词和内容概要
+- 可说明：转播自抖音、直播内容类型、时间等
+
+### 标签
+
+- 5–15 个相关标签，如：live stream, 摆摊, 路边直播, 抖音转播
+- 与标题、描述语义一致
+
+### 算法相关因素
+
+- **观看时长**：用户停留越久，推荐越高
+- **互动**：点赞、评论、分享
+- **画质与音质**：清晰稳定的流有助于留存
+
+## 三、config/youtube.ini 配置说明
+
+| 配置项 | 说明 | 示例 |
+|--------|------|------|
+| key | 必填，YouTube stream key | key = xxxx-xxxx-xxxx |
+| rtmps | 是否用 RTMPS（默认是） | rtmps = 否 |
+| bitrate | 视频比特率 kbps | bitrate = 4500 |
+
+## 四、稳定性建议
+
+1. 网络：上行带宽 ≥ 6 Mbps，建议有线
+2. 推流前在 YouTube 工作室完成标题、描述、标签设置
+3. 定期检查 config/youtube.ini 中的 stream key 是否有效

douyin_youtube_ffplay.py

@@ -0,0 +1,368 @@
+# douyin_youtube_ffplay.py
+import queue
+import unicodedata
+import platform
+import traceback
+import time
+import datetime
+import subprocess
+import threading
+import re
+import os
+import configparser
+
+
+class StreamEnded(Exception):
+    """主播真实下播的专用异常"""
+    pass
+
+
+def sanitize_title(text: str, max_len: int = 120) -> str:
+    if not text:
+        return ""
+    text = unicodedata.normalize("NFKC", text)
+    text = ''.join(ch for ch in text if unicodedata.category(ch)[0] != 'C')
+    text = ''.join(ch for ch in text if ord(ch) <= 0xFFFF)
+    return text.strip()[:max_len]
+
+
+def _stderr_reader_thread(proc, q):
+    try:
+        while True:
+            line = proc.stderr.readline()
+            if not line:
+                break
+            q.put(line)
+    except Exception as e:
+        try:
+            q.put(f"__ERR__READER__:{e}")
+        except Exception:
+            pass
+    finally:
+        try:
+            q.put(None)
+        except Exception:
+            pass
+
+
+def cleanup_proc(proc):
+    try:
+        if proc and proc.poll() is None:
+            try:
+                proc.terminate()
+                proc.wait(timeout=5)
+            except Exception:
+                if proc.poll() is None:
+                    try:
+                        proc.kill()
+                    except Exception:
+                        pass
+    except Exception:
+        pass
+
+
+def start_douyin_youtube_ffplay(
+    title: str,
+    anchor_name: str,
+    real_url: str,
+    rec_info: str,
+    record_name: str,
+    recording: set,
+    recording_time_list: dict,
+    running_list: list,
+    monitoring: list,
+    clear_record_info,
+    color_obj,
+):
+    """
+    抖音 → YouTube 推流主函数（单路推流）
+    只从 config/youtube.ini 读取一个 stream key（取第一个有效值）
+    """
+
+    # ====================== 读取 YouTube 配置 ======================
+    config_file = "config/youtube.ini"
+    rtmps_base = "rtmps://a.rtmp.youtube.com/live2/"
+    rtmp_base = "rtmp://a.rtmp.youtube.com/live2/"
+    use_rtmps = True
+    # 720p 竖屏 YouTube 建议 4–6 Mbps，偏低易触发「数据不足/卡顿」提示
+    b_v, maxrate, bufsize = "4000k", "4500k", "8000k"
+    stream_key = None
+    fast_audio = False  # config: fast_audio=1 可跳过 arnndn+长 EQ，显著减轻 CPU
+
+    if os.path.exists(config_file):
+        config = configparser.ConfigParser()
+        config.read(config_file, encoding="utf-8")
+        if config.has_section("youtube"):
+            for k, v in config.items("youtube"):
+                v = (v or "").strip()
+                if k == "rtmps" and v.lower() in ("0", "false", "否"):
+                    use_rtmps = False
+                elif k == "fast_audio" and v.lower() in ("1", "true", "yes", "是", "开", "on"):
+                    fast_audio = True
+                elif k == "bitrate" and v:
+                    try:
+                        n = int(v)
+                        b_v, maxrate, bufsize = f"{n}k", f"{min(n * 12 // 10, 8000)}k", f"{n * 2}k"
+                    except ValueError:
+                        pass
+                elif (k == "key" or k == "stream_key") and v and not v.startswith("#"):
+                    stream_key = v
+    if stream_key:
+        if stream_key.startswith("rtmp://") or stream_key.startswith("rtmps://"):
+            youtube_rtmp = stream_key
+        else:
+            youtube_rtmp = (rtmps_base if use_rtmps else rtmp_base) + stream_key
+        print(f"[INFO] 从 {config_file} 读取 YouTube 推流地址")
+    else:
+        raise ValueError(f"请在 {config_file} 中配置 key=你的stream_key")
+
+    # ====================== 常量配置 ======================
+    MAX_RETRY_DELAY = 90
+    INITIAL_RETRY_DELAY = 3
+    STDERR_QUEUE_TIMEOUT = 1.0
+    NO_FRAME_TIMEOUT = 120
+    START_CHECK_AFTER = 25
+    STALE_OUTPUT_SECONDS = 40
+    RECONNECT_DELAY_MAX = 10
+
+    END_KEYWORDS = [
+        "connection reset by peer",
+        "failed to write trailer",
+        "invalid data found",
+        "server returned 403",
+        "server returned 404",
+        "server returned 500",
+        "ingestion error",
+        "access denied",
+        "packet too short",
+        "client disconnected",
+        "live has ended",
+        "no route to host",
+        "connection timed out",
+        "connection refused",
+        "error writing output",
+        "broken pipe",
+        "i/o error",
+    ]
+
+    douyin_headers = (
+        "User-Agent: Mozilla/5.0 (iPhone; CPU iPhone OS 18_1 like Mac OS X) AppleWebKit/605.1.15\r\n"
+        "Referer: https://live.douyin.com/\r\n"
+        "Origin: https://live.douyin.com\r\n"
+    )
+
+    # ====================== 标题处理 ======================
+    timestamp_str = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
+    clean_title = sanitize_title(title)
+    stream_title = sanitize_title(f"{anchor_name}{('_' + clean_title) if clean_title else ''}_{timestamp_str}")
+    print(f"[INFO] {rec_info} 开始推流到 YouTube: {stream_title}")
+
+    # ====================== NVENC 检测（符合 YouTube 推荐比特率）======================
+    codec_v = "libx264"
+    # ultrafast+zerolatency：在软编下尽量让 speed≥1.0；画质略降、直播可接受
+    video_args = ["-preset", "ultrafast", "-tune", "zerolatency", "-profile:v", "high", "-level", "4.0",
+                  "-b:v", b_v, "-maxrate", maxrate, "-bufsize", bufsize]
+    try:
+        if platform.system().lower() in ["windows", "linux"]:
+            check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=5)
+            if check.returncode == 0:
+                enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], capture_output=True, text=True, timeout=5)
+                if "h264_nvenc" in (enc.stdout or ""):
+                    codec_v = "h264_nvenc"
+                    video_args = ["-profile:v", "high", "-level", "4.0",
+                                 "-tune", "ll", "-rc", "cbr", "-b:v", b_v,
+                                 "-maxrate", maxrate, "-bufsize", bufsize]
+                    print("[INFO] 检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
+    except Exception as e:
+        print(f"[WARN] NVENC 检测失败，回退软件编码: {e}")
+
+    # ====================== 开源音频处理：背景音乐弱化 + 防版权 ======================
+    _script_dir = os.path.dirname(os.path.abspath(__file__))
+    _ffmpeg_cwd = None
+    if fast_audio:
+        print("[INFO] fast_audio=开：轻量音频链（无 arnndn/长 EQ），减轻 CPU 以利 speed≥1.0")
+        _af_chain = "afftdn=nf=-26:tn=1,aresample=async=1:first_pts=0"
+    else:
+        # 优先 RNNoise(arnndn)，无模型则用 afftdn；aphaser 相位扰动可干扰 Content ID 指纹
+        _arnndn_paths = [
+            os.path.join(_script_dir, "arnndn-models", "cb.rnnn"),
+            os.path.join(os.path.dirname(_script_dir), "arnndn-models", "cb.rnnn"),
+            "arnndn-models/cb.rnnn",
+        ]
+        _arnndn_model = None
+        for _p in _arnndn_paths:
+            if os.path.isfile(_p):
+                _arnndn_model = os.path.normpath(_p)
+                break
+        if _arnndn_model:
+            print(f"[INFO] 使用 RNNoise 降噪模型: {_arnndn_model}")
+            _arnndn_base = os.path.dirname(os.path.dirname(os.path.abspath(_arnndn_model)))
+            _af_denoise = "arnndn=m=arnndn-models/cb.rnnn:mix=0.82,"
+            _ffmpeg_cwd = _arnndn_base
+        else:
+            print("[INFO] 未找到 arnndn 模型，使用 afftdn 降噪（可克隆 richardpl/arnndn-models 到 arnndn-models/）")
+            _af_denoise = "afftdn=nf=-26:tn=1,"
+
+        # 强化版：收紧带通 + 频率偏移 + 音高微调 + 多段EQ + 相位扰动（纯 FFmpeg 理论上限 ~70%）
+        _af_chain = (
+            _af_denoise
+            + "highpass=f=200,lowpass=f=3800,"
+            + "equalizer=f=150:width_type=o:width=2.5:g=-14,"
+            + "equalizer=f=350:width_type=o:width=2:g=-10,"
+            + "equalizer=f=600:width_type=o:width=1.8:g=-8,"
+            + "equalizer=f=1000:width_type=o:width=1.5:g=-6,"
+            + "equalizer=f=2500:width_type=o:width=1.2:g=-4,"
+            + "acompressor=threshold=-26dB:ratio=5:attack=8:release=80:makeup=5,"
+            + "afreqshift=shift=22,"
+            + "asetrate=48000*1.035,aresample=48000,"
+            + "aphaser=type=t:decay=0.4:delay=3:speed=0.7,"
+            + "volume=1.12,"
+            + "aresample=async=1:first_pts=0"
+        )
+
+    # 720p 竖屏，符合 YouTube 推荐：4–6 Mbps、2s 关键帧、AAC 128k
+    _video_mid = ["-vsync", "cfr", "-g", "60", "-keyint_min", "60", "-r", "30",
+                  "-bf", "0", "-sc_threshold", "0"]
+    if codec_v == "libx264":
+        _video_mid += ["-x264-params", "force-cfr=1:scenecut=0:open_gop=0:sync-lookahead=0"]
+    # -re：按源时间戳节奏拉流，避免突发过快；不用 realtime/arealtime（输入抖动时易让 YouTube 判为数据不足）
+    ffmpeg_command = [
+        "ffmpeg", "-y", "-loglevel", "info", "-nostdin",
+        "-stats", "-stats_period", "1",
+        "-rw_timeout", "50000000",
+        "-reconnect", "1", "-reconnect_at_eof", "1", "-reconnect_streamed", "1",
+        "-reconnect_delay_max", str(RECONNECT_DELAY_MAX),
+        "-fflags", "+genpts+discardcorrupt",
+        "-err_detect", "ignore_err",
+        "-max_delay", "500000",
+        "-thread_queue_size", "2048",
+        "-filter_threads", "4",
+        "-headers", douyin_headers,
+        "-re",
+        "-i", real_url,
+        # bilinear 比 lanczos 轻很多，利于 speed 稳定在 ≥1.0x
+        "-vf", "fps=30,scale=720:1280:force_original_aspect_ratio=decrease:flags=bilinear,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
+        "-c:v", codec_v,
+        *video_args,
+        *_video_mid,
+        "-pix_fmt", "yuv420p",
+        "-c:a", "aac", "-b:a", "128k", "-ar", "48000", "-ac", "2",
+        "-af", _af_chain,
+        "-flags", "+global_header",
+        "-flvflags", "no_duration_filesize",
+        "-f", "flv", youtube_rtmp
+    ]
+
+    proc = None
+    stderr_q = None
+    reader_t = None
+    retry_delay = INITIAL_RETRY_DELAY
+
+    try:
+        while True:
+            try:
+                if retry_delay > INITIAL_RETRY_DELAY:
+                    print(f"[WARN] 防风控等待 {retry_delay}s 后重新连接抖音源...")
+                time.sleep(retry_delay)
+
+                cleanup_proc(proc)
+                stderr_q = queue.Queue()
+
+                print(f"[INFO][{datetime.datetime.now():%H:%M:%S}] 启动 YouTube 推流 → {stream_title}")
+                _popen_kw = dict(
+                    stdin=subprocess.DEVNULL,
+                    stdout=subprocess.DEVNULL,
+                    stderr=subprocess.PIPE,
+                    text=True,
+                    bufsize=1,
+                    universal_newlines=True,
+                )
+                if _ffmpeg_cwd:
+                    _popen_kw["cwd"] = _ffmpeg_cwd
+                proc = subprocess.Popen(ffmpeg_command, **_popen_kw)
+                proc.last_out_ts = time.time()
+
+                reader_t = threading.Thread(target=_stderr_reader_thread, args=(proc, stderr_q))
+                reader_t.daemon = True
+                reader_t.start()
+
+                start_time = last_frame_time = time.time()
+
+                while True:
+                    try:
+                        try:
+                            line = stderr_q.get(timeout=STDERR_QUEUE_TIMEOUT)
+                        except queue.Empty:
+                            if time.time() - getattr(proc, "last_out_ts", time.time()) > STALE_OUTPUT_SECONDS:
+                                print("[WARN] 长时间无任何日志，强制重启进程")
+                                cleanup_proc(proc)
+                                break
+                            continue
+
+                        if line is None:
+                            if proc.poll() is not None:
+                                break
+                            continue
+
+                        line = line.strip()
+                        if line.startswith("__ERR__READER__"):
+                            print(f"[ERROR] stderr reader 异常: {line}")
+                            continue
+
+                        if line:
+                            proc.last_out_ts = time.time()
+                            print(f"[FFmpeg] {line}")
+                            line_lower = line.lower()
+
+                            if any(kw in line_lower for kw in END_KEYWORDS):
+                                print("[ERROR] 检测到主播真下播或被明确拒绝，停止推流")
+                                cleanup_proc(proc)
+                                raise StreamEnded()
+
+                            if re.search(r'frame=\s*\d+', line_lower) or "fps=" in line_lower:
+                                last_frame_time = time.time()
+
+                            if time.time() - start_time > START_CHECK_AFTER:
+                                if time.time() - last_frame_time > NO_FRAME_TIMEOUT:
+                                    print(f"[WARN] 连续 {NO_FRAME_TIMEOUT}s 无新帧，判定主播已下播")
+                                    cleanup_proc(proc)
+                                    raise StreamEnded()
+
+                    except StreamEnded:
+                        raise
+                    except Exception as e:
+                        print(f"[ERROR] 内层异常: {e}")
+                        traceback.print_exc()
+                        cleanup_proc(proc)
+                        retry_delay = min(retry_delay * 2, MAX_RETRY_DELAY)
+                        break
+
+                continue
+
+            except StreamEnded:
+                print(f"[INFO] 主播已下播，停止 YouTube 转推 → {record_name}")
+                break
+
+            except Exception as e:
+                print(f"[ERROR] 外层异常: {e}")
+                traceback.print_exc()
+                retry_delay = min(retry_delay * 2, MAX_RETRY_DELAY)
+                continue
+
+    except Exception as e:
+        print(f"[FATAL] YouTube 推流最外层异常: {e}")
+        traceback.print_exc()
+    finally:
+        cleanup_proc(proc)
+
+        try:
+            recording.discard(record_name)
+            recording_time_list.pop(record_name, None)
+            if real_url in running_list:
+                running_list.remove(real_url)
+            monitoring[0] = max(0, monitoring[0] - 1)
+            clear_record_info(record_name, real_url)
+        except Exception:
+            pass
+
+        color_obj.print_colored(f"[{record_name}] YouTube 推流已彻底停止并清理完毕\n", color_obj.GREEN)

index.html

@@ -1,215 +1,336 @@
-<!--
-    Project: DouyinLiveRecorder
-    Author: Hmily
-    Build: 2023.08.14 - 20:24:05
-    GitHub Project URL: https://github.com/ihmily/DouyinLiveRecorder
--->
 <!DOCTYPE html>
-<html lang="en">
+<html lang="zh">
 <head>
-    <meta charset="UTF-8">
-    <meta name="viewport" content="width=device-width, initial-scale=1.0">
-    <meta name="referrer" content="never"> 
-    <title>M3U8 视频播放器</title>
-    <link rel="preconnect" href="https://fonts.googleapis.com">
-    <link rel="preconnect" href="https://fonts.gstatic.com" crossorigin>
-    <link href="https://fonts.googleapis.com/css2?family=Roboto:wght@400;700&amp;display=swap" rel="stylesheet">
-    <script src="https://cdn.jsdelivr.net/npm/hls.js@latest/dist/hls.min.js"></script>
-    <script src="https://cdn.jsdelivr.net/npm/flv.js@1.6.2/dist/flv.min.js"></script>
-
-    <style>
-        body {
-            font-family: 'Roboto', Arial, sans-serif;
-            background-color: #1a237e;
-            display: flex;
-            justify-content: center;
-            align-items: center;
-            height: 100vh;
-            margin: 0;
-            padding: 0;
-            color: #ffffff;
-            background-image: linear-gradient(120deg, #1a237e 0%, #283593 50%, #4a148c 100%);
-        }
-
-
-        .container {
-            max-width: 640px;
-            width: 80%;
-            padding: 20px;
-            background-color: #ffffff;
-            border-radius: 10px;
-            box-shadow: 0px 0px 5px 0px rgba(0,0,0,0.15);
-        }
-
-        #videoPlayer {
-            width: 100%;
-            height: 0;
-            padding-bottom: 56.25%;
-            position: relative;
-            background-color: #000;
-            border-radius: 5px;
-            box-shadow: 0px 0px 10px 0px rgba(0,0,0,0.15);
-            display: none;
-        }
-
-        video {
-            position: absolute;
-            top: 0;
-            left: 0;
-            width: 100%;
-            height: 100%;
-        }
-
-        #videoUrlInput{
-        	display: block;
-        	width: 100%;
-        	margin: 10px 0;
-        	padding: 8px;
-        	border-radius: 5px;
-        	border: 1px solid #ccc;
-            box-sizing: border-box;
-        }
-
-        #playButton {
-            display: block;
-            width: 100%;
-            padding: 10px;
-            background-color: #283593;
-            color: white;
-            font-weight: bold;
-            border-radius: 5px;
-            border: none;
-            cursor: pointer;
-            transition: background-color 0.3s;
-            margin: 0 0 10px 0;
-            box-shadow: 0px 2px 4px 0px rgba(0,0,0,0.15);
-        }
-
-        #playButton:hover {
-            background-color: #1a237e;
-        }
-
-        .description {
-            margin-top: 20px;
-            line-height: 1.4;
-            font-size: 14px;
-            text-align: left;
-            background-color: #f8f9fa;
-            padding: 15px;
-            border-radius: 5px;
-            
-            box-shadow: 0px 0px 5px 0px rgba(0,0,0,0.15);
-            display: block;
-        }
-        .footer {
-          margin-top: 30px;
-          text-align: center;
-          font-size: 14px;
-          color: white;
-        }
-
-        p{
-            color: black;
-        }
-        
-        a.no_style {
-            color: inherit;
-            text-decoration: none;
-        }
-        @media screen and (max-width: 768px) {
-            .container {
-                width: 90%;
-                border-radius: 0;
-                box-shadow: none;
-                margin-top:30px;
-            }
-            body {
-                overflow-y: scroll;
-            }
-            #videoUrlInput{
-                
-            	margin-top: 30px;
-            	margin-bottom: 10px;
-            }
-        
-        }
-
-    </style>
+<meta charset="UTF-8">
+<meta name="viewport" content="width=device-width,initial-scale=1">
+<title>多进程录制控制台</title>
+<style>
+:root{--bg:#1a237e;--accent:#283593;--text:#fff;--card:#fff;--card-text:#000}
+@media(prefers-color-scheme:dark){:root{--card:#1e1e1e;--card-text:#fff}}
+body{margin:0;font-family:system-ui,-apple-system,sans-serif;background:linear-gradient(135deg,var(--bg),#283593,#4a148c);color:var(--text);min-height:100vh;display:flex;justify-content:center;padding:20px;box-sizing:border-box}
+.container{max-width:720px;width:100%;background:var(--card);color:var(--card-text);border-radius:12px;padding:24px;box-shadow:0 8px 32px rgba(0,0,0,.4)}
+h1{margin:0 0 24px;font-size:1.6em;display:flex;align-items:center;gap:12px}
+#processSelect{padding:8px;border-radius:8px;border:1px solid #ddd;font-size:1em}
+#statusIndicator{font-size:1.2em;font-weight:600}
+h2{margin:24px 0 12px;font-size:1.4em}
+h3{margin:16px 0 8px;font-size:1.2em}
+input,button,textarea{width:100%;padding:12px;margin:8px 0;border-radius:8px;border:none;box-sizing:border-box;font-size:1em}
+input,textarea{background:#f5f5f5;color:#000;border:1px solid #ddd;font-family:monospace;overflow:hidden;resize:none;min-height:100px}
+button{background:var(--accent);color:#fff;cursor:pointer;font-weight:600;transition:.2s}
+button:hover{background:#1a237e}
+button.loading{opacity:.7;pointer-events:none}
+button.loading::after{content:" ⏳";animation:spin 1s linear infinite}
+#pm2Buttons{display:grid;grid-template-columns:repeat(auto-fit,minmax(100px,1fr));gap:8px;margin:12px 0}
+#pm2Log{background:#000;color:#0f0;padding:12px;height:320px;overflow-y:auto;font-family:monospace;font-size:.9em;border-radius:8px;white-space:pre-wrap;word-break:break-all}
+.configButtons{display:grid;grid-template-columns:repeat(auto-fit,minmax(120px,1fr));gap:8px;margin:12px 0}
+.configStatus{color:#0f0;margin-top:8px;font-family:monospace;font-size:0.9em}
+#obsAddress{background:#f0f0f0;padding:12px;border-radius:8px;font-family:monospace;font-size:1.1em;margin:8px 0;word-break:break-all}
+@keyframes spin{to{transform:rotate(360deg)}}
+</style>
 </head>
 <body>
-	<div class="container">
-	    <input type="text" id="videoUrlInput" placeholder="请输入 M3U8或者FLV 视频链接">
-	    <button id="playButton">播放视频</button>
-	    <div id="videoPlayer">
-	        <video controls></video>
-	    </div>
-	    <div class="description">
-            <p><strong>说明</strong><p>
-            <p>M3U8文件格式</p>
-            <p>M3U8文件是采用UTF-8编码格式的M3U文件。M3U文件本身是一个纯文本索引文件，其核心功能是记录多媒体文件链接。当用户打开此类文件时，播放软件会根据索引查找相应的音视频文件网络地址，然后进行在线播放。</p>
-            <p>M3U最初设计用于播放音频文件，例如MP3。但随着时间推移，更多的播放器和软件开始使用M3U来播放视频文件列表，同时也支持在线流媒体音频源的指定。目前，许多播放器和软件都兼容M3U文件格式。</p>
-            <p>FLV文件格式（Flash Video Format）是Adobe公司开发的一种专门用于网页视频播放的文件格式。FLV格式的视频文件通常用于播放短视频和在线流媒体，可以嵌入到网页中供用户观看。FLV视频通常由Adobe Flash Player播放器播放，而其他第三方播放器也支持此格式。</p>
-        </div>
-        <div class="footer">
-          <p>&copy; 2023 <a href='https://github.com/ihmily/DouyinLiveRecorder' class="no_style" target="_blank">Hmily</a>. All rights reserved.</p>
-        </div>
-	    <script>
-    	    function httpToHttps(url) {
-              if (url.startsWith("http://")) {
-                return url.replace("http://", "https://");
-              }
-              return url;
-            }
-	        function playVideo() {
-            let videoUrl = document.getElementById('videoUrlInput').value;
-            const video = document.querySelector('#videoPlayer video');
-            const description = document.querySelector('.description');
-            if (videoUrl == ''){
-                alert('请输入视频链接');
-                return;
-            }
-            videoUrl = httpToHttps(videoUrl);
-            if (videoUrl.includes('.m3u8')) {
-                videoPlayer.style.display = 'block';
-                description.style.display = 'none';
-                if (Hls.isSupported()) {
-                    const hls = new Hls();
-                    hls.attachMedia(video);
-                    hls.on(Hls.Events.MEDIA_ATTACHED, () => {
-                        hls.loadSource(videoUrl);
-                    });
-                } else if (video.canPlayType('application/vnd.apple.mpegurl')) {
-                    video.src = videoUrl;
-                } else {
-                    alert('M3U8 格式不受您的浏览器支持。');
-                    console.error('M3U8 格式不受您的浏览器支持。');
-                    return;
-                }
-            } else if (videoUrl.includes('.flv')) {
-                if (flvjs.isSupported()) {
-                    const flvPlayer = flvjs.createPlayer({
-                        type: 'flv',
-                        url: videoUrl
-                    });
-                    flvPlayer.attachMediaElement(video);
-                    flvPlayer.load();
-                    flvPlayer.play();
-                } else {
-                    alert('FLV 格式不受您的浏览器支持。');
-                    console.error('FLV 格式不受您的浏览器支持。');
-                    return;
-                }
+<div class="container">
+    <h1>
+        进程:
+        <select id="processSelect"></select>
+        <span id="statusIndicator">⚪ 加载中...</span>
+    </h1>
+    <p id="processScriptNote" style="font-size:0.88em;margin:-12px 0 20px;opacity:0.88;font-family:ui-monospace,monospace"></p>
 
-                videoPlayer.style.display = 'block';
-                description.style.display = 'none';
-            } else {
-                console.error('不支持播放该视频格式。');
-                alert('不支持播放该视频格式。');
+    <!-- YouTube 专属配置（仅 youtube 时显示） -->
+    <div id="youtubeOnlySection" style="display:none;">
+        <h2>YouTube 配置编辑 (youtube.ini)</h2>
+        <div class="configEditor">
+            <h3>youtube.ini</h3>
+            <textarea id="youtubeConfig"></textarea>
+            <div class="configButtons">
+                <button id="loadYoutubeBtn">加载配置</button>
+                <button id="saveYoutubeBtn">保存配置</button>
+            </div>
+            <pre class="configStatus" id="youtubeStatus">就绪</pre>
+        </div>
+    </div>
+
+    <!-- URL_config.ini 共享配置（youtube 或 tiktok 时显示） -->
+    <div id="urlConfigSection" style="display:none;">
+        <h2>URL 配置编辑 (URL_config.ini)</h2>
+        <div class="configEditor">
+            <h3>URL_config.ini</h3>
+            <textarea id="urlConfig"></textarea>
+            <div class="configButtons">
+                <button id="loadUrlBtn">加载配置</button>
+                <button id="saveUrlBtn">保存配置</button>
+            </div>
+            <pre class="configStatus" id="urlStatus">就绪</pre>
+        </div>
+    </div>
+
+    <!-- OBS 推流地址区（仅 obs 时显示） -->
+    <div id="obsSection" style="display:none;">
+        <h2>OBS 直播推流地址</h2>
+        <p>请在 OBS → 设置 → 推流 → 服务选择“自定义”，服务器填写以下地址：</p>
+        <div id="obsAddress">srt://live.local:10080/live/obs</div>
+        <p>密钥（Stream Key）留空即可。</p>
+    </div>
+
+    <h2>PM2 进程控制</h2>
+    <div id="pm2Buttons">
+        <button data-action="start">启动</button>
+        <button data-action="stop">停止</button>
+        <button data-action="restart">重启</button>
+        <button data-action="status">手动刷新</button>
+    </div>
+    <h2>实时日志（自动每秒刷新）</h2>
+    <pre id="pm2Log">正在加载状态与日志...</pre>
+</div>
+<script>
+/** 进程列表仅来自 GET /process_monitor（web2.py 启动时扫描项目根目录自动识别）；PM2 名 = 脚本主文件名（无扩展名）。 */
+let PROCESS_MONITOR = [];
+
+function pm2NameFromScript(script) {
+    const base = String(script).split(/[/\\]/).pop() || '';
+    const i = base.lastIndexOf('.');
+    return i > 0 ? base.slice(0, i) : base;
+}
+
+function isYoutubeScript(script) {
+    return /\.py$/i.test(script) && pm2NameFromScript(script).startsWith('youtube');
+}
+function isTiktokScript(script) {
+    return /\.py$/i.test(script) && pm2NameFromScript(script).startsWith('tiktok');
+}
+function isObsScript(script) {
+    return pm2NameFromScript(script).startsWith('obs');
+}
+
+async function loadProcessMonitor() {
+    const res = await fetch('/process_monitor');
+    if (!res.ok) throw new Error(String(res.status));
+    const data = await res.json();
+    const entries = data.entries || [];
+    PROCESS_MONITOR = entries.map((e) => ({
+        script: e.script,
+        label: e.label || e.script,
+        pm2: e.pm2 || pm2NameFromScript(e.script),
+    }));
+}
+
+function getEntryByPm2(name) {
+    return PROCESS_MONITOR.find((e) => e.pm2 === name) || null;
+}
+
+function fillProcessSelect() {
+    processSelect.innerHTML = '';
+    PROCESS_MONITOR.forEach((e) => {
+        const opt = document.createElement('option');
+        opt.value = e.pm2;
+        opt.textContent = `${e.label}（${e.script}）`;
+        processSelect.appendChild(opt);
+    });
+}
+
+const logEl = document.getElementById('pm2Log');
+const statusIndicator = document.getElementById('statusIndicator');
+const processSelect = document.getElementById('processSelect');
+let currentProcess = '';
+
+// 各专属区域
+const youtubeOnlySection = document.getElementById('youtubeOnlySection');
+const urlConfigSection = document.getElementById('urlConfigSection');
+const obsSection = document.getElementById('obsSection');
+
+// youtube.ini 编辑（youtube 专属）
+const youtubeConfig = document.getElementById('youtubeConfig');
+const loadYoutubeBtn = document.getElementById('loadYoutubeBtn');
+const saveYoutubeBtn = document.getElementById('saveYoutubeBtn');
+const youtubeStatus = document.getElementById('youtubeStatus');
+
+// URL_config.ini 编辑（youtube 和 tiktok 共享）
+const urlConfig = document.getElementById('urlConfig');
+const loadUrlBtn = document.getElementById('loadUrlBtn');
+const saveUrlBtn = document.getElementById('saveUrlBtn');
+const urlStatus = document.getElementById('urlStatus');
+
+function refreshProcessScriptNote() {
+    const el = document.getElementById('processScriptNote');
+    const ent = getEntryByPm2(currentProcess);
+    el.textContent = ent ? `脚本: ${ent.script} · PM2 名: ${ent.pm2}` : '';
+}
+
+processSelect.addEventListener('change', () => {
+    currentProcess = processSelect.value;
+    refreshProcessScriptNote();
+    fetchStatus();
+    updateSectionsVisibility();
+});
+
+function updateSectionsVisibility() {
+    const ent = getEntryByPm2(currentProcess);
+    const s = ent ? ent.script : '';
+    const isYoutube = ent && isYoutubeScript(s);
+    const isTiktok = ent && isTiktokScript(s);
+    const isObs = ent && isObsScript(s);
+
+    youtubeOnlySection.style.display = isYoutube ? 'block' : 'none';
+    urlConfigSection.style.display = (isYoutube || isTiktok) ? 'block' : 'none';
+    obsSection.style.display = isObs ? 'block' : 'none';
+
+    if (isYoutube) loadYoutubeConfig();
+    if (isYoutube || isTiktok) loadUrlConfig();
+}
+
+// textarea 高度自适应
+function autoResize(textarea) {
+    textarea.style.height = 'auto';
+    textarea.style.height = (textarea.scrollHeight) + 'px';
+}
+[youtubeConfig, urlConfig].forEach(ta => {
+    ta.addEventListener('input', () => autoResize(ta));
+    autoResize(ta);
+});
+
+// 通用加载/保存
+async function loadConfig(endpoint, textarea, statusEl) {
+    statusEl.textContent = '加载中...';
+    try {
+        const res = await fetch(`${endpoint}?process=${currentProcess}`);
+        if (!res.ok) throw new Error(`HTTP ${res.status}`);
+        const data = await res.json();
+        textarea.value = data.content || '';
+        autoResize(textarea);
+        statusEl.textContent = '加载成功';
+    } catch (err) {
+        statusEl.textContent = `加载失败: ${err.message}`;
+    }
+}
+
+async function saveConfig(endpoint, textarea, statusEl, saveBtn) {
+    statusEl.textContent = '保存中...';
+    const content = textarea.value;
+    try {
+        const res = await fetch(`${endpoint}?process=${currentProcess}`, {
+            method: 'POST',
+            headers: {'Content-Type': 'application/json'},
+            body: JSON.stringify({content})
+        });
+        if (!res.ok) throw new Error(`HTTP ${res.status}`);
+        const data = await res.json();
+        statusEl.textContent = data.message || '保存成功';
+    } catch (err) {
+        statusEl.textContent = `保存失败: ${err.message}`;
+    } finally {
+        if (saveBtn) saveBtn.classList.remove('loading');
+    }
+}
+
+// youtube.ini（仅 youtube）
+function loadYoutubeConfig() { loadConfig('/get_config', youtubeConfig, youtubeStatus); }
+function saveYoutubeConfig() {
+    saveYoutubeBtn.classList.add('loading');
+    saveConfig('/save_config', youtubeConfig, youtubeStatus, saveYoutubeBtn);
+}
+loadYoutubeBtn.onclick = loadYoutubeConfig;
+saveYoutubeBtn.onclick = saveYoutubeConfig;
+
+// URL_config.ini（youtube 和 tiktok 共享）
+function loadUrlConfig() { loadConfig('/get_url_config', urlConfig, urlStatus); }
+function saveUrlConfig() {
+    saveUrlBtn.classList.add('loading');
+    saveConfig('/save_url_config', urlConfig, urlStatus, saveUrlBtn);
+}
+loadUrlBtn.onclick = loadUrlConfig;
+saveUrlBtn.onclick = saveUrlConfig;
+
+function scrollLog(){logEl.scrollTop = logEl.scrollHeight}
+
+function updateStatus(process_status){
+    let emoji = '⚪', text = '未知';
+    if(process_status === 'online'){ emoji = '🟢'; text = '运行中'; }
+    else if(process_status === 'stopped'){ emoji = '🔴'; text = '已停止'; }
+    else if(process_status === 'errored'){ emoji = '🔴'; text = '错误'; }
+    else if(process_status === 'launching' || process_status === 'starting'){ emoji = '🟡'; text = '启动中'; }
+    else if(process_status === 'waiting restart'){ emoji = '🟡'; text = '等待重启'; }
+    else if(process_status === 'not_found'){ emoji = '❌'; text = '未注册到 PM2'; }
+    statusIndicator.innerHTML = `${emoji} ${text}`;
+}
+
+async function pm2Action(action){
+    const btn = document.querySelector(`[data-action="${action}"]`);
+    if(btn) btn.classList.add('loading');
+    const url = `/${action}?process=${currentProcess}`;
+    try{
+        const res = await fetch(url);
+        if(!res.ok) throw new Error('网络错误');
+        const data = await res.json();
+        if(action === 'status'){
+            updateStatus(data.process_status);
+            let logText = `【PM2 全状态表格】（${new Date().toLocaleTimeString()}）\n${data.raw_status}\n\n`;
+            if(data.process_status === 'not_found'){
+                const ent = getEntryByPm2(currentProcess);
+                const hint = ent ? `${ent.script}（PM2 名: ${ent.pm2}）` : currentProcess;
+                logText += `【提示】未在 PM2 中找到: ${hint}\n`;
+            }else{
+                logText += `【实时输出日志】`;
+                if(data.recent_log.includes('不存在') || data.recent_log.includes('无日志路径')){
+                    logText += `\n${data.recent_log}`;
+                }else{
+                    logText += `（最近 ${data.recent_log.trim().split('\n').length} 行）\n${data.recent_log || '无新输出'}`;
+                }
+                logText += `\n\n【实时错误日志】`;
+                if(data.recent_error.includes('不存在') || data.recent_error.includes('无日志路径')){
+                    logText += `\n${data.recent_error}`;
+                }else{
+                    logText += `（最近 ${data.recent_error.trim().split('\n').length} 行）\n${data.recent_error || '无错误'}`;
+                }
             }
+            logEl.textContent = logText;
+            scrollLog();
+        }else{
+            const ent = getEntryByPm2(currentProcess);
+            const who = ent ? `${ent.script} (${ent.pm2})` : currentProcess;
+            logEl.textContent = `操作: ${action} → ${who}\n${data.output || '成功'}\n\n正在刷新状态...`;
+            scrollLog();
+            setTimeout(fetchStatus, 1500);
         }
+    }catch(err){
+        logEl.textContent = `请求失败: ${err.message}`;
+        scrollLog();
+        updateStatus('unknown');
+    }finally{
+        if(btn) btn.classList.remove('loading');
+    }
+}
 
-        document.getElementById('playButton').addEventListener('click', playVideo);
-	    </script>
-	</div>
+async function fetchStatus(){ pm2Action('status'); }
+
+// 按钮事件委托
+document.getElementById('pm2Buttons').addEventListener('click', e=>{
+    const btn = e.target.closest('button');
+    if(!btn) return;
+    const action = btn.dataset.action;
+    if(action && action !== 'status') pm2Action(action);
+});
+
+(async function boot() {
+    try {
+        await loadProcessMonitor();
+    } catch (e) {
+        logEl.textContent = '无法加载 /process_monitor（请用本服务打开的页面访问，或检查 web2 是否已启动）\n' + (e && e.message ? e.message : '');
+        statusIndicator.textContent = '❌ 未连接';
+        return;
+    }
+    if (!PROCESS_MONITOR.length) {
+        logEl.textContent = '未发现任何入口脚本（项目根应有 tiktok*.py / youtube*.py / obs*.sh，且 Web 为当前 web*.py）';
+        return;
+    }
+    fillProcessSelect();
+    currentProcess = PROCESS_MONITOR[0].pm2;
+    processSelect.value = currentProcess;
+    refreshProcessScriptNote();
+    setInterval(fetchStatus, 1000);
+    fetchStatus();
+    updateSectionsVisibility();
+})();
+</script>
 </body>
 </html>

main.py

@@ -1164,11 +1164,9 @@ def start_record(url_data: tuple, count_variable: int = -1) -> None:
                         push_at = datetime.datetime.today().strftime('%Y-%m-%d %H:%M:%S')
                         if port_info['is_live'] is False:
                             print(f"\r{record_name} 等待直播... ")
-
                             # 直接退出线程eric
-                            # return 
-                             # 继续循环
-                            continue
+                            # continue # 继续循环
+                            return  # 线程彻底退出
 
                             if start_pushed:
                                 if over_show_push:
@@ -1620,322 +1618,33 @@ def start_record(url_data: tuple, count_variable: int = -1) -> None:
                                         with max_request_lock:
                                             error_count += 1
                                             error_window.append(1)
-
+                                
                                 else:
-                                    
-
-                                    # ====================== 抖音→YouTube 2025（重构：单层重试 + 统一清理） ======================
-                                    import queue, unicodedata, platform, traceback
-
-                                    class StreamEnded(Exception):
-                                        pass
-
-                                    def sanitize_title(text: str, max_len: int = 120) -> str:
-                                        if not text: return ""
-                                        text = unicodedata.normalize("NFKC", text)
-                                        text = ''.join(ch for ch in text if unicodedata.category(ch)[0] != 'C')
-                                        text = ''.join(ch for ch in text if ord(ch) <= 0xFFFF)
-                                        return text.strip()[:max_len]
-
-                                    def _stderr_reader_thread(proc, q):
-                                        try:
-                                            while True:
-                                                line = proc.stderr.readline()
-                                                if not line:
-                                                    break
-                                                q.put(line)
-                                        except Exception as e:
-                                            try:
-                                                q.put(f"__ERR__READER__:{e}")
-                                            except Exception:
-                                                pass
-                                        finally:
-                                            try:
-                                                q.put(None)
-                                            except Exception:
-                                                pass
-
-                                    def cleanup_proc(proc):
-                                        try:
-                                            if proc and proc.poll() is None:
-                                                try:
-                                                    proc.terminate()
-                                                    proc.wait(timeout=5)
-                                                except Exception:
-                                                    if proc.poll() is None:
-                                                        try:
-                                                            proc.kill()
-                                                        except Exception:
-                                                            pass
-                                        except Exception:
-                                            pass
-
-                                    # ========== 参数配置（保留你原始配置） ==========
-                                    # YT_STREAM_KEY = "qxvb-r47b-r5ju-6ud3-6k7z"
-                                    youtube_rtmp = f"rtmp://a.rtmp.youtube.com/live2/x04z-564w-aks7-embw-30y4"
-                                    # youtube_rtmp="rtmp://192.168.31.184/live/douyin"
-
-                                    # # ←←←← 在这块代码的上方先定义你要推的多个地址 ←←←←
-                                    # rtmp_targets = [
-                                    #     "rtmp://a.rtmp.youtube.com/live2/qxvb-r47b-r5ju-6ud3-6k7z",   # 主频道
-                                    #     "rtmp://192.168.31.184/live/douyin",   # 备用频道（换成你的第二个 YouTube 密钥）
-                                    # ]
-
-                                    # # 用 | 拼接所有地址（任何一个断开都不会影响其他）
-                                    # tee_outputs = "|".join([f"[f=flv]{url}" for url in rtmp_targets])
-
-
-
-                                    MAX_RETRY_DELAY = 90
-                                    INITIAL_RETRY_DELAY = 3
-                                    NO_FRAME_TIMEOUT = 120
-                                    START_CHECK_AFTER = 25.0
-                                    STALE_OUTPUT_SECONDS = 40
-                                    STDERR_QUEUE_TIMEOUT = 1.0
-
-                                    END_KEYWORDS = [
-                                        "connection reset by peer",
-                                        "failed to write trailer",
-                                        "invalid data found",
-                                        "server returned 403",
-                                        "server returned 404",
-                                        "ingestion error",
-                                        "access denied",
-                                        "packet too short",
-                                        "client disconnected",
-                                        "live has ended",
-                                        "no route to host",
-                                        "connection timed out",
-                                    ]
-
-                                    timestamp_str = time.strftime("%Y-%m-%d_%H-%M-%S", time.localtime())
-                                    _clean_title_in_name = sanitize_title(title_in_name)
-                                    stream_title = sanitize_title(f"{anchor_name}{('_' + _clean_title_in_name) if _clean_title_in_name else ''}_{timestamp_str}")
-                                    print(f"[INFO] {rec_info} 开始推流到 YouTube: {stream_title}")
-
-                                    # NVENC 检测（原样保留）
-                                    codec_v, preset_v, tune_param = "libx264", "veryfast", ["-tune", "zerolatency"]
-                                    try:
-                                        if platform.system().lower() in ["windows", "linux"]:
-                                            check = subprocess.run(["nvidia-smi"], capture_output=True, timeout=5)
-                                            if check.returncode == 0:
-                                                enc = subprocess.run(["ffmpeg", "-hide_banner", "-encoders"], capture_output=True, text=True, timeout=5)
-                                                if "h264_nvenc" in (enc.stdout or ""):
-                                                    codec_v, preset_v, tune_param = "h264_nvenc", "p5", ["-tune", "ll", "-rc", "vbr", "-cq", "21", "-b:v", "2500k"]
-                                                    print("[INFO] 检测到 NVIDIA GPU → 使用 NVENC 硬件加速")
-                                    except Exception as e:
-                                        print(f"[WARN] NVENC 检测失败，回退软件编码: {e}")
-
-                                    # headers & ffmpeg command（保持原来参数）
-                                    douyin_headers = (
-                                        "User-Agent: Mozilla/5.0 (iPhone; CPU iPhone OS 18_1 like Mac OS X) AppleWebKit/605.1.15\r\n"
-                                        "Referer: https://live.douyin.com/\r\n"
-                                        "Origin: https://live.douyin.com\r\n"
+                                    import sys
+                                    sys.path.insert(0, './dist')
+                                    from douyin_srs_ffplay import start_douyin_srs_ffplay
+                                    # 调用
+                                    start_douyin_srs_ffplay(
+                                        title=title_in_name,
+                                        anchor_name=anchor_name,
+                                        real_url=real_url,
+                                        rec_info=rec_info,
+                                        record_name=record_name,
+                                        recording=recording,
+                                        recording_time_list=recording_time_list,
+                                        running_list=running_list,
+                                        monitoring=monitoring,
+                                        clear_record_info=clear_record_info,
+                                        color_obj=color_obj
                                     )
-                                    ffmpeg_command = [
-                                        "ffmpeg", "-loglevel", "info",
-                                        "-rw_timeout", "15000000",
-                                        "-reconnect", "1", "-reconnect_at_eof", "1", "-reconnect_streamed", "1",
-                                        "-reconnect_delay_max", "15",
-                                        "-fflags", "+genpts+discardcorrupt",
-                                        "-err_detect", "ignore_err",
-                                        "-thread_queue_size", "8192",
-                                        "-headers", douyin_headers,
-                                        "-i", real_url,
-                                        "-vf", "scale=720:1280:force_original_aspect_ratio=decrease,pad=720:1280:(ow-iw)/2:(oh-ih)/2:black",
-                                        "-c:v", codec_v, "-preset", preset_v, *tune_param,
-                                        "-b:v", "2500k", "-maxrate", "2500k", "-bufsize", "5000k",
-                                        "-g", "50", "-r", "25", "-pix_fmt", "yuv420p",
-                                        "-c:a", "aac", "-b:a", "128k", "-ar", "44100", "-ac", "2",
-                                        "-af", "aresample=async=1:first_pts=0",
-                                        "-flags", "+global_header",
-                                        "-f", "flv", youtube_rtmp
-                                        # "-f", "tee",
-                                        # "-map", "0:v", "-map", "0:a",
-                                        # tee_outputs
-                                    ]
-
-
-                                    # srs内网配置
-                                    # ffmpeg_command = [
-                                    #    "ffmpeg",
-                                    #     "-loglevel", "info", 
-                                    #     "-err_detect", "ignore_err+explode",
-                                    #     "-fflags", "+genpts+discardcorrupt+igndts",
-                                    #     "-reconnect", "1",
-                                    #     "-reconnect_at_eof", "1",
-                                    #     "-reconnect_streamed", "1",
-                                    #     "-reconnect_delay_max", "7",
-                                    #     "-rw_timeout", "30000000",
-                                    #     "-headers", douyin_headers,
-
-                                    #     # ===== 输入源 =====
-                                    #     "-i", real_url,
-                                    #     "-c:v", "copy",
-                                    #     "-c:a", "copy",
-                                    #     "-max_muxing_queue_size", "9999",
-                                    #     "-f", "flv", srs_rtmp
-                                    # ]
-
-                                    # ---- 单层重试循环（清晰可控） ----
-                                    proc = None
-                                    stderr_q = None
-                                    reader_t = None
-                                    retry_delay = INITIAL_RETRY_DELAY
-
-                                    try:
-                                        while True:
-                                            try:
-                                                if retry_delay > INITIAL_RETRY_DELAY:
-                                                    print(f"[WARN] 防风控等待 {retry_delay}s 后重新连接抖音源...")
-                                                time.sleep(retry_delay)
-
-                                                # 每次重连前先清理上一次的进程/线程
-                                                try:
-                                                    cleanup_proc(proc)
-                                                except Exception:
-                                                    pass
-                                                if stderr_q:
-                                                    # 垃圾化旧队列以便 GC
-                                                    stderr_q = None
-                                                stderr_q = queue.Queue()
-
-                                                print(f"[INFO][{datetime.datetime.now():%H:%M:%S}] 启动 YouTube 推流 → {stream_title}")
-                                                proc = subprocess.Popen(
-                                                    ffmpeg_command,
-                                                    stdin=subprocess.DEVNULL,
-                                                    stdout=subprocess.DEVNULL,
-                                                    stderr=subprocess.PIPE,
-                                                    text=True,
-                                                    bufsize=1,
-                                                    universal_newlines=True
-                                                )
-                                                proc.last_out_ts = time.time()
-
-                                                # 启动 stderr reader
-                                                reader_t = threading.Thread(target=_stderr_reader_thread, args=(proc, stderr_q))
-                                                reader_t.daemon = True
-                                                reader_t.start()
-
-                                                start_time = last_frame_time = time.time()
-
-                                                # ---- 监控循环（单一职责：处理 stderr 日志并决定是否结束/重连） ----
-                                                while True:
-                                                    try:
-                                                        try:
-                                                            line = stderr_q.get(timeout=STDERR_QUEUE_TIMEOUT)
-                                                        except queue.Empty:
-                                                            # 超时检查：如果太久没有任何日志，判为僵死，重启 proc（跳出内层，进行重试）
-                                                            if time.time() - getattr(proc, "last_out_ts", time.time()) > STALE_OUTPUT_SECONDS:
-                                                                print("[WARN] 长时间无任何日志，强制重启进程")
-                                                                cleanup_proc(proc)
-                                                                break
-                                                            continue
-
-                                                        if line is None:
-                                                            # reader 线程结束；如果 proc 已退出，跳出去重试
-                                                            if proc.poll() is not None:
-                                                                break
-                                                            else:
-                                                                continue
-
-                                                        line = line.strip()
-                                                        if line.startswith("__ERR__READER__"):
-                                                            print(f"[ERROR] stderr reader 异常: {line}")
-                                                            continue
-
-                                                        if line:
-                                                            proc.last_out_ts = time.time()
-                                                            print(f"[FFmpeg] {line}")
-                                                            line_lower = line.lower()
-
-                                                            # 检测到明确下播关键字 -> 认为主播真下播，立即退出（不再重试）
-                                                            if any(kw in line_lower for kw in END_KEYWORDS):
-                                                                print("[ERROR] 检测到主播真下播或被明确拒绝，停止推流")
-                                                                cleanup_proc(proc)
-                                                                raise StreamEnded()
-
-                                                            # 帧检测：更新 frame 时间戳
-                                                            if re.search(r'frame=\s*\d+', line_lower) or "fps=" in line_lower:
-                                                                last_frame_time = time.time()
-
-                                                            # 超时无新帧 => 认为下播
-                                                            if time.time() - start_time > START_CHECK_AFTER:
-                                                                if time.time() - last_frame_time > NO_FRAME_TIMEOUT:
-                                                                    print(f"[WARN] 连续 {NO_FRAME_TIMEOUT}s 无新帧，判定主播已下播")
-                                                                    cleanup_proc(proc)
-                                                                    raise StreamEnded()
-
-                                                    except StreamEnded:
-                                                        # 真实下播，抛到外层处理（最终会退出函数）
-                                                        raise
-                                                    except Exception as e:
-                                                        # 内层非致命异常：打印、回退重试间隔，退出监控循环以在外层重试
-                                                        print(f"[ERROR] 内层异常: {e}")
-                                                        traceback.print_exc()
-                                                        cleanup_proc(proc)
-                                                        retry_delay = min(retry_delay * 2, MAX_RETRY_DELAY)
-                                                        break  # 跳出监控循环 -> 外层 while 会继续并重试
-
-                                                # 如果监控循环走到这里并不是因为 StreamEnded（例如 break），则重试连接（loop continue）
-                                                # 将在 while True 的下一次循环中进行等待并重连
-                                                continue
-
-                                            except StreamEnded:
-                                                # 真实的主播下播，停止并彻底退出本录制线程
-                                                print(f"[INFO] 主播已下播，停止 YouTube 转推 → {record_name}")
-                                                break
-
-                                            except Exception as e:
-                                                # 外层致命异常：打印并退出循环（会在 finally 里做统一清理）
-                                                print(f"[ERROR] 外层异常: {e}")
-                                                traceback.print_exc()
-                                                retry_delay = min(retry_delay * 2, MAX_RETRY_DELAY)
-                                                # 等待并尝试重连（除非你希望直接退出，这里保留重试策略）
-                                                continue
-
-                                        # ============ 正常或 StreamEnded 后的统一清理（在这里 break 到这里） ============
-                                        cleanup_proc(proc)
-
-                                        # 以下清理放在 try/except 里以防止清理过程出错导致漏逻辑
-                                        try:
-                                            recording.discard(record_name)
-                                            recording_time_list.pop(record_name, None)
-                                            if record_url in running_list:
-                                                running_list.remove(record_url)
-                                            global monitoring
-                                            monitoring = max(0, monitoring - 1)
-                                            clear_record_info(record_name, record_url)
-                                        except Exception:
-                                            pass
-
-                                        color_obj.print_colored(f"[{record_name}] YouTube 推流已彻底停止并清理完毕\n", color_obj.GREEN)
-                                        return
-
-                                    except Exception as e:
-                                        # 最外层异常也要统一清理（保证不会留下僵尸状态）
-                                        print(f"[FATAL] YouTube 推流最外层异常: {e}")
-                                        traceback.print_exc()
-                                        try:
-                                            cleanup_proc(proc)
-                                        except Exception:
-                                            pass
-                                        try:
-                                            recording.discard(record_name)
-                                            recording_time_list.pop(record_name, None)
-                                            if record_url in running_list:
-                                                running_list.remove(record_url)
-                                            # global monitoring
-                                            monitoring = max(0, monitoring - 1)
-                                            clear_record_info(record_name, record_url)
-                                        except Exception:
-                                            pass
-                                        color_obj.print_colored(f"[{record_name}] YouTube 推流异常退出但已清理\n", color_obj.RED)
-                                        return
-
                                 count_time = time.time()
 
 
+
+
+
+
+
                 except Exception as e:
                     logger.error(f"错误信息: {e} 发生错误的行数: {e.__traceback__.tb_lineno}")
                     with max_request_lock:
@@ -1980,6 +1689,7 @@ def start_record(url_data: tuple, count_variable: int = -1) -> None:
 
 
 def backup_file(file_path: str, backup_dir_path: str, limit_counts: int = 6) -> None:
+
     try:
         if not os.path.exists(backup_dir_path):
             os.makedirs(backup_dir_path)

obs2.sh

@@ -0,0 +1,5 @@
+export DISPLAY=:0
+ffplay -fflags nobuffer -flags low_delay -framedrop \
+-probesize 32 -analyzeduration 0 -sync ext -infbuf \
+-vf "setpts=PTS-STARTPTS" \
+'srt://127.0.0.1:10080?streamid=#!::r=live/livestream,m=request&latency=10'

tiktok/index.html

@@ -0,0 +1,175 @@
+<!DOCTYPE html>
+<html lang="zh">
+<head>
+<meta charset="UTF-8">
+<meta name="viewport" content="width=device-width,initial-scale=1">
+<title>HDMI 录制控制台</title>
+<script src="https://cdn.jsdelivr.net/npm/hls.js@latest"></script>
+<style>
+:root{--bg:#1a237e;--accent:#283593;--text:#fff;--card:#fff;--card-text:#000}
+@media(prefers-color-scheme:dark){:root{--card:#1e1e1e;--card-text:#fff}}
+body{margin:0;font-family:system-ui,-apple-system,sans-serif;background:linear-gradient(135deg,var(--bg),#283593,#4a148c);color:var(--text);min-height:100vh;display:flex;justify-content:center;padding:20px;box-sizing:border-box}
+.container{max-width:720px;width:100%;background:var(--card);color:var(--card-text);border-radius:12px;padding:24px;box-shadow:0 8px 32px rgba(0,0,0,.4)}
+h1{margin:0 0 24px;font-size:1.6em;display:flex;align-items:center;gap:12px}
+#statusIndicator{font-size:1.2em;font-weight:600}
+h2{margin:24px 0 12px;font-size:1.4em}
+input,button{width:100%;padding:12px;margin:8px 0;border-radius:8px;border:none;box-sizing:border-box;font-size:1em}
+input{background:#f5f5f5;color:#000;border:1px solid #ddd}
+button{background:var(--accent);color:#fff;cursor:pointer;font-weight:600;transition:.2s}
+button:hover{background:#1a237e}
+button.loading{opacity:.7;pointer-events:none}
+button.loading::after{content:" ⏳";animation:spin 1s linear infinite}
+#pm2Buttons{display:grid;grid-template-columns:repeat(auto-fit,minmax(100px,1fr));gap:8px;margin:12px 0}
+#videoPlayer{position:relative;width:100%;padding-bottom:56.25%;background:#000;border-radius:8px;overflow:hidden;margin:16px 0;display:none}
+video{position:absolute;inset:0;width:100%;height:100%}
+#loading{position:absolute;inset:0;display:flex;align-items:center;justify-content:center;color:#fff;font-size:1.8em;pointer-events:none;background:rgba(0,0,0,.5);opacity:0;transition:opacity .3s;border-radius:8px}
+#pm2Log{background:#000;color:#0f0;padding:12px;height:320px;overflow-y:auto;font-family:monospace;font-size:.9em;border-radius:8px;white-space:pre-wrap;word-break:break-all}
+@keyframes spin{to{transform:rotate(360deg)}}
+</style>
+</head>
+<body>
+<div class="container">
+    <h1>进程: hdmi <span id="statusIndicator">⚪ 加载中...</span></h1>
+
+    <h2>视频播放器（M3U8 / FLV）</h2>
+    <input type="text" id="videoUrlInput" placeholder="请输入视频链接">
+    <button id="playButton">播放</button>
+    <div id="videoPlayer">
+        <video controls autoplay playsinline></video>
+        <div id="loading">加载中...</div>
+    </div>
+
+    <h2>PM2 进程控制</h2>
+    <div id="pm2Buttons">
+        <button data-action="start">启动</button>
+        <button data-action="stop">停止</button>
+        <button data-action="restart">重启</button>
+        <button data-action="status">手动刷新</button>
+    </div>
+
+    <h2>实时日志（自动每秒刷新）</h2>
+    <pre id="pm2Log">正在加载状态与日志...</pre>
+</div>
+
+<script>
+const video = document.querySelector('video');
+const player = document.getElementById('videoPlayer');
+const loading = document.getElementById('loading');
+const logEl = document.getElementById('pm2Log');
+const statusIndicator = document.getElementById('statusIndicator');
+
+function httpToHttps(url){return url.replace(/^http:/,"https:")}
+
+function scrollLog(){logEl.scrollTop = logEl.scrollHeight}
+
+function updateStatus(process_status){
+    let emoji = '⚪', text = '未知';
+    if(process_status === 'online'){ emoji = '  '; text = '运行中'; }
+    else if(process_status === 'stopped'){ emoji = '  '; text = '已停止'; }
+    else if(process_status === 'errored'){ emoji = '  '; text = '错误'; }
+    else if(process_status === 'launching' || process_status === 'starting'){ emoji = '  '; text = '启动中'; }
+    else if(process_status === 'waiting restart'){ emoji = '  '; text = '等待重启'; }
+    else if(process_status === 'not_found'){ emoji = '❌'; text = '未注册到 PM2'; }
+    statusIndicator.innerHTML = `${emoji} ${text}`;
+}
+
+async function playVideo(){
+    let url = document.getElementById('videoUrlInput').value.trim();
+    if(!url) return alert('请输入视频链接');
+    url = httpToHttps(url);
+    player.style.display = 'block';
+    loading.style.opacity = 1;
+    video.pause(); video.src = '';
+
+    if(url.endsWith('.m3u8')){
+        if(Hls.isSupported()){
+            const hls = new Hls({enableWorker:true});
+            hls.loadSource(url);
+            hls.attachMedia(video);
+            hls.on(Hls.Events.MANIFEST_PARSED, ()=>loading.style.opacity=0);
+            hls.on(Hls.Events.ERROR, (e,data)=>{alert('HLS 错误: '+data.type); loading.style.opacity=0});
+        }else if(video.canPlayType('application/vnd.apple.mpegurl')){
+            video.src = url; video.play(); loading.style.opacity=0;
+        }else{alert('浏览器不支持 M3U8'); return}
+    }else if(url.endsWith('.flv')){
+        if(typeof flvjs !== 'undefined' && flvjs.isSupported()){
+            const flvPlayer = flvjs.createPlayer({type:'flv',url,isLive:true});
+            flvPlayer.attachMediaElement(video);
+            flvPlayer.load(); flvPlayer.play();
+            flvPlayer.on(flvjs.Events.LOADING_COMPLETE, ()=>loading.style.opacity=0);
+        }else{
+            const script = document.createElement('script');
+            script.src = 'https://cdn.jsdelivr.net/npm/flv.js@1.6.2/dist/flv.min.js';
+            script.onload = playVideo;
+            document.head.appendChild(script);
+            return;
+        }
+    }else{alert('仅支持 .m3u8 或 .flv 格式'); return}
+}
+document.getElementById('playButton').onclick = playVideo;
+
+// PM2 控制 + 实时状态/日志
+async function pm2Action(action){
+    const btn = document.querySelector(`[data-action="${action}"]`);
+    if(btn) btn.classList.add('loading');
+
+    try{
+        const res = await fetch(`/${action}`);
+        if(!res.ok) throw new Error('网络错误');
+        const data = await res.json();
+
+        if(action === 'status'){
+            updateStatus(data.process_status);
+
+            let logText = `【PM2 全状态表格】（${new Date().toLocaleTimeString()}）\n${data.raw_status}\n\n`;
+
+            if(data.process_status === 'not_found'){
+                logText += `【提示】进程 "hdmi" 未注册到 PM2（可能被 pm2 delete 删除）\n`;
+            }else{
+                logText += `【实时输出日志】`;
+                if(data.recent_log.includes('不存在') || data.recent_log.includes('无日志路径')){
+                    logText += `\n${data.recent_log}`;
+                }else{
+                    logText += `（最近 ${data.recent_log.trim().split('\n').length} 行）\n${data.recent_log || '无新输出'}`;
+                }
+
+                logText += `\n\n【实时错误日志】`;
+                if(data.recent_error.includes('不存在') || data.recent_error.includes('无日志路径')){
+                    logText += `\n${data.recent_error}`;
+                }else{
+                    logText += `（最近 ${data.recent_error.trim().split('\n').length} 行）\n${data.recent_error || '无错误'}`;
+                }
+            }
+
+            logEl.textContent = logText;
+            scrollLog();
+        }else{
+            logEl.textContent = `操作: ${action}\n${data.output || '成功'}\n\n正在刷新状态...`;
+            scrollLog();
+            setTimeout(fetchStatus, 1500);
+        }
+    }catch(err){
+        logEl.textContent = `请求失败: ${err.message}`;
+        scrollLog();
+        updateStatus('unknown');
+    }finally{
+        if(btn) btn.classList.remove('loading');
+    }
+}
+
+async function fetchStatus(){ pm2Action('status'); }
+
+// 按钮事件委托
+document.getElementById('pm2Buttons').addEventListener('click', e=>{
+    const btn = e.target.closest('button');
+    if(!btn) return;
+    const action = btn.dataset.action;
+    if(action && action !== 'status') pm2Action(action);
+});
+
+// 自动刷新（每 1 秒）
+setInterval(fetchStatus, 1000);
+fetchStatus();
+</script>
+</body>
+</html>

tiktok/tiktok.py

@@ -0,0 +1,142 @@
+from fastapi import FastAPI
+from fastapi.responses import FileResponse, JSONResponse
+from pathlib import Path
+import asyncio
+import re
+from fastapi.middleware.cors import CORSMiddleware
+
+app = FastAPI(title="HDMI 录制控制台")
+
+# ---------------- 配置 ----------------
+BOT_NAME = "hdmi"
+BASE_DIR = Path(__file__).parent
+DEFAULT_LOG_DIR = BASE_DIR.parent / ".pm2" / "logs"
+MAX_LOG_LINES = 300
+
+# CORS
+app.add_middleware(
+   CORSMiddleware,
+   allow_origins=["*"],
+   allow_methods=["GET"],
+   allow_headers=["*"],
+)
+
+# ---------------- 工具 ----------------
+def strip_ansi_codes(text: str) -> str:
+   return re.sub(r'\x1b\[[0-9;]*m', '', text)
+
+async def run_pm2(cmd: str) -> str:
+   process = await asyncio.create_subprocess_shell(
+       f"pm2 {cmd}",
+       stdout=asyncio.subprocess.PIPE,
+       stderr=asyncio.subprocess.PIPE,
+   )
+   try:
+       stdout, stderr = await asyncio.wait_for(process.communicate(), timeout=15.0)
+       return (stdout or stderr).decode(errors="ignore").strip()
+   except asyncio.TimeoutError:
+       process.kill()
+       return "ERROR: PM2 命令超时"
+
+async def read_log_path(path: str, lines: int) -> str:
+   if not path:
+       return "无日志路径\n"
+   if "/dev/null" in path:
+       return "日志输出被禁用（PM2 配置为无日志）\n"
+   log_file = Path(path)
+   if not log_file.exists():
+       return f"日志文件不存在: {path}\n"
+   try:
+       with open(log_file, "r", encoding="utf-8", errors="ignore") as f:
+           content_lines = f.readlines()
+           return "".join(content_lines[-lines:]) if content_lines else "无日志内容\n"
+   except Exception as e:
+       return f"读取日志失败 ({path}): {str(e)}\n"
+
+async def get_hdmi_info() -> dict:
+   describe_raw = await run_pm2(f"describe {BOT_NAME}")
+   describe_clean = strip_ansi_codes(describe_raw)
+
+   if ("No such process" in describe_clean or
+       "Unknown process" in describe_clean or
+       "not found" in describe_clean.lower() or
+       not describe_clean.strip()):
+       return {
+           "process_status": "not_found",
+           "out_path": None,
+           "err_path": None,
+       }
+
+   status = "unknown"
+   out_path = None
+   err_path = None
+
+   for line in describe_raw.splitlines():
+       line_clean = strip_ansi_codes(line)
+       if line_clean.count('│') < 2:
+           continue
+       parts = [p.strip() for p in line_clean.split('│') if p.strip()]
+
+       if len(parts) >= 2:
+           key = parts[0].lower()
+           value = parts[1]
+
+           if key == "status":
+               status = value.lower()
+           elif key == "out_log_path":
+               out_path = value
+           elif key == "err_log_path":
+               err_path = value
+
+   # 备用默认路径（仅当 describe 未提供时）
+   if not out_path:
+       out_path = str(DEFAULT_LOG_DIR / f"{BOT_NAME}-out.log")
+   if not err_path:
+       err_path = str(DEFAULT_LOG_DIR / f"{BOT_NAME}-error.log")
+
+   return {
+       "process_status": status,
+       "out_path": out_path,
+       "err_path": err_path,
+   }
+
+# ---------------- 路由 ----------------
+@app.get("/start")
+async def start():
+   output = await run_pm2(f"start {BOT_NAME}")
+   return JSONResponse({"output": output})
+
+@app.get("/stop")
+async def stop():
+   output = await run_pm2(f"stop {BOT_NAME}")
+   return JSONResponse({"output": output})
+
+@app.get("/restart")
+async def restart():
+   output = await run_pm2(f"restart {BOT_NAME}")
+   return JSONResponse({"output": output})
+
+@app.get("/status")
+async def status():
+   full_status_raw = await run_pm2("status")
+   full_status = strip_ansi_codes(full_status_raw) # 去除颜色代码，前端显示更干净
+
+   info = await get_hdmi_info()
+
+   recent_log = await read_log_path(info["out_path"], MAX_LOG_LINES)
+   recent_error = await read_log_path(info["err_path"], MAX_LOG_LINES)
+
+   if info["process_status"] == "not_found":
+       recent_log = "进程未注册到 PM2（可能被 pm2 delete 删除或从未保存）\n"
+       recent_error = ""
+
+   return JSONResponse({
+       "raw_status": full_status,
+       "process_status": info["process_status"],
+       "recent_log": recent_log,
+       "recent_error": recent_error,
+   })
+
+@app.get("/")
+async def index():
+   return FileResponse(BASE_DIR / "index.html")

tiktok/tiktok.sh

@@ -0,0 +1 @@
+uvicorn web:app --host 0.0.0.0 --port 8000 --reload

web2.py

@@ -0,0 +1,353 @@
+from fastapi import FastAPI, Query, Request
+from fastapi.responses import FileResponse, JSONResponse
+from pathlib import Path
+import asyncio
+import re
+from typing import Optional
+from fastapi.middleware.cors import CORSMiddleware
+
+app = FastAPI(title="多进程录制控制台")
+
+# ---------------- 配置（根目录结构） ----------------
+BASE_DIR = Path(__file__).parent
+CONFIG_DIR = BASE_DIR / "config"
+DEFAULT_LOG_DIR = BASE_DIR / ".pm2" / "logs"
+
+MAX_LOG_LINES = 300
+
+
+def _label_short(prefix: str) -> str:
+    return {"tiktok": "TikTok", "youtube": "YouTube", "obs": "OBS", "web": "Web 控制台"}.get(prefix, prefix)
+
+
+def discover_script_entries() -> tuple:
+    """扫描项目根目录自动识别入口：tiktok*.py、youtube*.py、obs*.sh，以及当前本文件（Web 控制台）。PM2 名 = 主文件名（无扩展名）。"""
+    base = BASE_DIR
+    web_path = Path(__file__).resolve()
+    entries: list[dict] = []
+
+    for path in sorted(base.glob("tiktok*.py")):
+        if path.is_file() and path.resolve() != web_path:
+            entries.append({"script": path.name, "label": _label_short("tiktok")})
+
+    for path in sorted(base.glob("youtube*.py")):
+        if path.is_file() and path.resolve() != web_path:
+            entries.append({"script": path.name, "label": _label_short("youtube")})
+
+    for path in sorted(base.glob("obs*.sh")):
+        if path.is_file():
+            entries.append({"script": path.name, "label": _label_short("obs")})
+
+    entries.append({"script": web_path.name, "label": _label_short("web")})
+
+    return tuple(entries)
+
+
+SCRIPT_ENTRIES = discover_script_entries()
+
+
+def pm2_name_from_script(script: str) -> str:
+    return Path(script).stem
+
+
+def _stem(script: str) -> str:
+    return Path(script).stem
+
+
+def is_youtube_script(script: str) -> bool:
+    return script.endswith(".py") and _stem(script).startswith("youtube")
+
+
+def is_tiktok_script(script: str) -> bool:
+    return script.endswith(".py") and _stem(script).startswith("tiktok")
+
+
+def _build_process_monitor():
+    return tuple(
+        {
+            "pm2": pm2_name_from_script(e["script"]),
+            "script": e["script"],
+            "label": e["label"],
+        }
+        for e in SCRIPT_ENTRIES
+    )
+
+
+PROCESS_MONITOR = _build_process_monitor()
+VALID_PROCESSES = frozenset(p["pm2"] for p in PROCESS_MONITOR)
+
+URL_CONFIG_PM2 = frozenset(
+    pm2_name_from_script(e["script"])
+    for e in SCRIPT_ENTRIES
+    if is_tiktok_script(e["script"]) or is_youtube_script(e["script"])
+)
+
+
+def script_for_pm2(pm2: str) -> Optional[str]:
+    for p in PROCESS_MONITOR:
+        if p["pm2"] == pm2:
+            return p["script"]
+    return None
+
+# CORS
+app.add_middleware(
+    CORSMiddleware,
+    allow_origins=["*"],
+    allow_methods=["GET", "POST"],
+    allow_headers=["*"],
+)
+
+# ---------------- 工具函数 ----------------
+def strip_ansi_codes(text: str) -> str:
+    return re.sub(r'\x1b\[[0-9;]*m', '', text)
+
+
+async def run_pm2(cmd: str, timeout: float = 15.0) -> str:
+    process = await asyncio.create_subprocess_shell(
+        f"pm2 {cmd}",
+        stdout=asyncio.subprocess.PIPE,
+        stderr=asyncio.subprocess.PIPE,
+    )
+    try:
+        stdout, stderr = await asyncio.wait_for(process.communicate(), timeout=timeout)
+        result = (stdout or stderr).decode(errors="ignore").strip()
+        return result if result else "命令执行完成（无输出）"
+    except asyncio.TimeoutError:
+        process.kill()
+        await process.wait()
+        return "ERROR: PM2 命令超时，已强制终止"
+
+
+async def force_kill_ffmpeg(process_name: str):
+    """尝试强杀与该进程相关的 ffmpeg"""
+    cmds = [
+        # 优先杀带有进程名的 ffmpeg（最精准）
+        f"pkill -f 'ffmpeg.*{process_name}' || true",
+        # 再杀所有 ffmpeg（兜底，比较暴力）
+        "killall -9 ffmpeg 2>/dev/null || true",
+    ]
+
+    for cmd in cmds:
+        proc = await asyncio.create_subprocess_shell(
+            cmd,
+            stdout=asyncio.subprocess.DEVNULL,
+            stderr=asyncio.subprocess.DEVNULL,
+        )
+        await proc.wait()
+        await asyncio.sleep(0.4)  # 稍微间隔，避免竞争
+
+
+async def read_log_path(path: str, lines: int) -> str:
+    if not path:
+        return "无日志路径\n"
+    if "/dev/null" in path:
+        return "日志输出被禁用（PM2 配置为无日志）\n"
+    log_file = Path(path)
+    if not log_file.exists():
+        return f"日志文件不存在: {path}\n"
+    try:
+        with open(log_file, "r", encoding="utf-8", errors="ignore") as f:
+            content_lines = f.readlines()
+            return "".join(content_lines[-lines:]) if content_lines else "无日志内容\n"
+    except Exception as e:
+        return f"读取日志失败 ({path}): {str(e)}\n"
+
+
+async def get_process_info(process: str) -> dict:
+    describe_raw = await run_pm2(f"describe {process}", timeout=10.0)
+    describe_clean = strip_ansi_codes(describe_raw)
+
+    if any(x in describe_clean.lower() for x in ["no such process", "unknown process", "not found"]) or not describe_clean.strip():
+        return {
+            "process_status": "not_found",
+            "out_path": None,
+            "err_path": None,
+        }
+
+    status = "unknown"
+    out_path = None
+    err_path = None
+
+    for line in describe_raw.splitlines():
+        line_clean = strip_ansi_codes(line)
+        if line_clean.count('│') < 2:
+            continue
+        parts = [p.strip() for p in line_clean.split('│') if p.strip()]
+        if len(parts) >= 2:
+            key = parts[0].lower()
+            value = parts[1]
+            if key == "status":
+                status = value.lower()
+            elif key == "out_log_path":
+                out_path = value
+            elif key == "err_log_path":
+                err_path = value
+
+    if not out_path:
+        out_path = str(DEFAULT_LOG_DIR / f"{process}-out.log")
+    if not err_path:
+        err_path = str(DEFAULT_LOG_DIR / f"{process}-error.log")
+
+    return {
+        "process_status": status,
+        "out_path": out_path,
+        "err_path": err_path,
+    }
+
+# ---------------- 配置路由（youtube.ini，仅 youtube） ----------------
+@app.get("/get_config")
+async def get_config(process: str = Query(..., description="进程名")):
+    sc = script_for_pm2(process)
+    if not sc or not is_youtube_script(sc):
+        return JSONResponse({"error": "仅 youtube*.py 对应进程支持 youtube.ini 编辑"}, status_code=400)
+    
+    config_file = CONFIG_DIR / "youtube.ini"
+    if not config_file.exists():
+        return {"content": "# youtube.ini 文件不存在，将创建空文件\n"}
+    try:
+        content = config_file.read_text(encoding="utf-8")
+        return {"content": content}
+    except Exception as e:
+        return JSONResponse({"error": f"读取失败: {str(e)}"}, status_code=500)
+
+@app.post("/save_config")
+async def save_config(request: Request, process: str = Query(..., description="进程名")):
+    sc = script_for_pm2(process)
+    if not sc or not is_youtube_script(sc):
+        return JSONResponse({"error": "仅 youtube*.py 对应进程支持 youtube.ini 编辑"}, status_code=400)
+    
+    try:
+        data = await request.json()
+        content = data.get("content", "")
+    except:
+        return JSONResponse({"error": "无效的 JSON 数据"}, status_code=400)
+    
+    config_file = CONFIG_DIR / "youtube.ini"
+    try:
+        CONFIG_DIR.mkdir(parents=True, exist_ok=True)
+        config_file.write_text(content, encoding="utf-8")
+        return {"message": "配置保存成功"}
+    except Exception as e:
+        return JSONResponse({"error": f"保存失败: {str(e)}"}, status_code=500)
+
+# ---------------- 配置路由（URL_config.ini，youtube 和 tiktok 共享） ----------------
+@app.get("/get_url_config")
+async def get_url_config(process: str = Query(..., description="进程名")):
+    if process not in URL_CONFIG_PM2:
+        return JSONResponse({"error": "仅 tiktok*.py / youtube*.py 对应进程支持 URL 配置编辑"}, status_code=400)
+    
+    config_file = CONFIG_DIR / "URL_config.ini"
+    if not config_file.exists():
+        return {"content": "# URL_config.ini 文件不存在，将创建空文件\n"}
+    try:
+        content = config_file.read_text(encoding="utf-8")
+        return {"content": content}
+    except Exception as e:
+        return JSONResponse({"error": f"读取失败: {str(e)}"}, status_code=500)
+
+@app.post("/save_url_config")
+async def save_url_config(request: Request, process: str = Query(..., description="进程名")):
+    if process not in URL_CONFIG_PM2:
+        return JSONResponse({"error": "仅 tiktok*.py / youtube*.py 对应进程支持 URL 配置编辑"}, status_code=400)
+    
+    try:
+        data = await request.json()
+        content = data.get("content", "")
+    except:
+        return JSONResponse({"error": "无效的 JSON 数据"}, status_code=400)
+    
+    config_file = CONFIG_DIR / "URL_config.ini"
+    try:
+        CONFIG_DIR.mkdir(parents=True, exist_ok=True)
+        config_file.write_text(content, encoding="utf-8")
+        return {"message": "配置保存成功"}
+    except Exception as e:
+        return JSONResponse({"error": f"保存失败: {str(e)}"}, status_code=500)
+
+# ---------------- PM2 控制路由 ----------------
+@app.get("/start")
+async def start(process: str = Query(..., description="进程名")):
+    if process not in VALID_PROCESSES:
+        return JSONResponse({"output": f"无效进程名: {process}"}, status_code=400)
+    output = await run_pm2(f"start {process}")
+    return JSONResponse({"output": output})
+
+
+@app.get("/stop")
+async def stop(process: str = Query(..., description="进程名")):
+    if process not in VALID_PROCESSES:
+        return JSONResponse({"output": f"无效进程名: {process}"}, status_code=400)
+
+    # 第一步：尝试优雅停止
+    pm2_output = await run_pm2(f"stop {process}")
+
+    # 第二步：等待 PM2 信号传播（通常 1~3 秒）
+    await asyncio.sleep(2.0)
+
+    # 第三步：录制类进程才强杀 ffmpeg（web* 控制台不杀 ffmpeg）
+    if not process.startswith("web"):
+        await force_kill_ffmpeg(process)
+
+    # 第四步：再等一小会儿，确认
+    await asyncio.sleep(1.0)
+
+    return JSONResponse({
+        "message": "已执行 stop" + ("" if process.startswith("web") else " + 强杀 ffmpeg"),
+        "pm2_output": pm2_output,
+        "note": "如果仍有残留，可多次点击停止或检查 pm2 logs"
+    })
+
+
+@app.get("/restart")
+async def restart(process: str = Query(..., description="进程名")):
+    if process not in VALID_PROCESSES:
+        return JSONResponse({"output": f"无效进程名: {process}"}, status_code=400)
+    output = await run_pm2(f"restart {process}")
+    if not process.startswith("web"):
+        await force_kill_ffmpeg(process)
+    return JSONResponse({"output": output})
+
+
+@app.get("/status")
+async def status(process: str = Query(..., description="进程名")):
+    if process not in VALID_PROCESSES:
+        return JSONResponse({
+            "raw_status": "",
+            "process_status": "invalid",
+            "recent_log": f"无效进程名: {process}",
+            "recent_error": ""
+        })
+
+    full_status_raw = await run_pm2("status", timeout=8.0)
+    full_status = strip_ansi_codes(full_status_raw)
+    info = await get_process_info(process)
+    recent_log = await read_log_path(info["out_path"], MAX_LOG_LINES)
+    recent_error = await read_log_path(info["err_path"], MAX_LOG_LINES)
+
+    if info["process_status"] == "not_found":
+        recent_log = "进程未注册到 PM2（可能被 pm2 delete 删除或从未保存）\n"
+        recent_error = ""
+
+    return JSONResponse({
+        "raw_status": full_status,
+        "process_status": info["process_status"],
+        "recent_log": recent_log,
+        "recent_error": recent_error,
+    })
+
+
+# ---------------- 进程列表（供前端同步，由 discover_script_entries 自动扫描） ----------------
+@app.get("/process_monitor")
+async def process_monitor():
+    return {
+        "entries": [
+            {"pm2": p["pm2"], "script": p["script"], "label": p["label"]}
+            for p in PROCESS_MONITOR
+        ]
+    }
+
+
+# ---------------- 首页 ----------------
+@app.get("/")
+async def index():
+    return FileResponse(BASE_DIR / "index.html")

web2.sh

@@ -0,0 +1,2 @@
+# Ubuntu：本分支控制台入口（与无「2」分支的 web / youtube.py 等区分）
+uvicorn web2:app --host 0.0.0.0 --port 8001 --reload

youtubeKey

@@ -1,38 +0,0 @@
-ue78-1c3e-mr9g-14mz-9r4z   # 没有ypp的美食
-qxvb-r47b-r5ju-6ud3-6k7z   # vlog频道
-x04z-564w-aks7-embw-30y4   #美食ypp
-
-
-
-; https://live.douyin.com/517715534931,主播: 一只羊
-; https://live.douyin.com/460525712926,主播: 丽姐摆摊记
-; https://live.douyin.com/745606325880,主播: w、(摆摊日记_)
-; https://live.douyin.com/675343045974,主播: 张子沐的串串(你的电子榨菜)
-; https://live.douyin.com/673565298571,主播: 轻舟已撞大冰山(摆摊vlog)
-; https://live.douyin.com/835571459859,主播: 海绵饱饱
-; https://live.douyin.com/152358755212,主播: 大美_红烧肉
-; https://live.douyin.com/990825651731,主播: 王同学摆摊日记(蜜汁烤鸡腿)
-; https://live.douyin.com/591442402624,主播: 76696515302
-; https://live.douyin.com/967381081829,主播: 憨憨的摆摊日记
-; https://live.douyin.com/78012762575,主播: 摆摊儿去划水
-; https://live.douyin.com/163813589919,主播: 不要熬夜(摆摊中)
-; https://live.douyin.com/498368994814,主播: 剪头发的小帆帆
-; https://live.douyin.com/617848099204,主播: 果妈要努力
-; https://live.douyin.com/821525628944,主播: 李熙雨⭐
-; https://live.douyin.com/993102287144,主播: 小茗早餐(薪笼记助创官)
-; https://live.douyin.com/701547125568,主播: 悠悠包
-; https://live.douyin.com/816130992220,主播: 甜昕冰冰的摆摊日记
-; https://live.douyin.com/876468215361,主播: 晓晓和凡凡
-; https://live.douyin.com/511335278313,主播: 秘书(摆摊休息版)
-; https://live.douyin.com/483160615952,主播: 小胡同学你好(饭团版)
-; https://live.douyin.com/525514386431,主播: 阿闯烤肉夹馍
-; https://live.douyin.com/8687122573,主播: 小彤炒粉
-; https://live.douyin.com/642534242822,主播: (小王_)煎饼果子
-; https://live.douyin.com/743565594721,主播: 汪汪汪小妞
-; https://live.douyin.com/249578288248,主播: 思思努力版
-; https://live.douyin.com/472140253414,主播: 戴盘龙
-; https://live.douyin.com/700846653732,主播: 三哥大锅菜_炒鸡(国基路店)官方号
-; https://live.douyin.com/81849868631,主播: 纯儿²¹(休息勿跑空哦)
-; https://live.douyin.com/690114366322,主播: 卤味鲜(东大)
-; https://live.douyin.com/469980190666,主播: 茜茜柠檬茶(小米茶档_)
-; https://live.douyin.com/388066418744,主播: 加速姐的摆摊日记