Fix 3.5 CYD: backlight GPIO27, LCD SCL 21 via Wire1, GT911 INT as input.

Align cyd_35r with CYD_PROJECT_GUIDE so ST7796 is not black-screened, LCD does not steal GT911 Wire, and firmware/docs match 22+21 wiring.

Co-authored-by: Cursor <cursoragent@cursor.com>
This commit is contained in:
2026-10-25 12:52:13 +08:00
parent 57644d22ae
commit 4bd42a9c39
17 changed files with 475 additions and 65 deletions

View File

@@ -1,5 +1,6 @@
; CYD ESP32-2432S028 — LCD1602A I2C(SDA22/SCL27) + SoftSPI 触控 + LVGL
; 触控/屏配置参考 tftest / hw269test / hw069digitdisplaytest
; CYD — LCD1602A I2C + 触控 + LVGL
; 2.8 (cyd): SDA22/SCL27 SoftSPI; 3.5 (cyd_35r): SDA22/SCL21 GT911, BL=27
; 参考 tftest / temperature / CYD_PROJECT_GUIDE.md
[env:cyd]
platform = espressif32
board = esp32dev
@@ -55,19 +56,26 @@ build_flags =
extra_scripts = pre:copy_lv_conf.py
; Optional 3.5" CYD ESP32-3248S035 (ST7796 resistive). Default remains [env:cyd].
; Optional 3.5" CYD ESP32-3248S035C (ST7796 + GT911 capacitive). Default [env:cyd].
; Build: pio run -e cyd_35r
; Keep TOUCH_CS=-1 — GPIO33 is GT911 SDA, not resistive touch CS.
; TFT_BL=GPIO27 (not 21 — 21 is GT911 INT / LCD SCL). See ../CYD_PROJECT_GUIDE.md
[env:cyd_35r]
extends = env:cyd
build_unflags =
-DILI9341_2_DRIVER=1
-DTFT_WIDTH=240
-DTFT_HEIGHT=320
-DTFT_BL=21
-DLV_MEM_SIZE=49152
build_flags =
${env:cyd.build_flags}
-UILI9341_2_DRIVER
-DST7796_DRIVER=1
-UTFT_WIDTH
-UTFT_HEIGHT
-DTFT_WIDTH=320
-DTFT_HEIGHT=480
-UTFT_BL
-DTFT_BL=27
-DCYD_BOARD_3248S035=1
-DUSE_HSPI_PORT
-DSUPPORT_TRANSACTIONS
-DTFT_RGB_ORDER=TFT_BGR
-DLV_MEM_SIZE=32768